Sanyo VM4500 manual Using Voice-Activated Dialing, Programming Voice Dial Tags

Using Voice-Activated Dialing

In addition to PCS Voice CommandSM (see page 211), you can use a Voice Dial tag to automatically dial a phone number in your Contacts directory. Your phone can store up to 30 Voice Dial tags.

To use a Voice Dial tag to call a phone number:

With the Flip Open:

1.Press or briefly.

2.Follow the voice prompts and recite the entry’s Voice Dial tag into your phone’s microphone.

With the Flip Closed:

1.Press and hold .

2.Follow the voice prompts and recite the entry’s Voice Dial tag into your phone’s microphone.

Note: To use the Voice Dial function, you must have a stored entries for Voice Dial (see “Programming Voice Dial Tags” below).

Programming Voice Dial Tags

To program a voice dial tag:

1.Press to access the main menu.

2.Select Voice Services and press .

3.Select Voice Dial and press .

4.Select Program and press .

5.The phone will prompt you to say the name you want to program. Wait for the beep and then say the name.

6.Respond to the prompt by repeating the name after the beep.

7.Enter or highlight the Voice Dial entry (name) in the Contacts

list and press .

8.Select the labeled category that includes your desired phone

number and press . (The display shows “Voice Dial Recorded.”)

Note: Record Voice Dial tags in a quiet environment and without the aid of an accessory (for example, a headset or hands-free car kit).

Section 2: Understanding Your PCS Phone

2I: Using Your Phone’s Voice Services 125