Adjusting the Phone’s Volume Settings

To adjust the Ringer/Key volume:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Sounds and press .

4.Select Ringer/Key Vol. and press .

5.Select the item you wish to change and press .

Ringer Volume to adjust Ringer tone volume.

Start-up/Pw-offto adjust Start-up/Power-off tone volume.

Key Beep to adjust Key Beep tone volume.

6.Adjust a volume level by using / on the Navigation key and

press .

Ringer Off to set the Voice Call ringer volume to off. (Only appears in Ringer Volume setting.)

Silence All to set all the ringer volume to off. (Only appears in Ringer Volume setting. See “Silence All” on page 51.)

To adjust the Earpiece or Speaker volume:

1.Follow steps 1-3 above.

2.Select Receiver Vol. and press .

3.Select either Earpiece or Speaker and press .

When you use speakerphone mode, select Speaker during step 3 above.

4.Adjust a volume level by using / on the Navigation key and

press .

Tip: You can adjust the ringer volume in standby mode by using the Side Volume key, and adjust earpiece volume during a call by using / on the Navigation key or the Side Volume key.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings

49

Page 61
Image 61
Sanyo VM4500 manual Adjusting the Phone’s Volume Settings