Sanyo VM4500 Setting the Flash Function, Setting the Self-timer, Seconds or 5 Seconds and press

Setting the Flash Function

To activate the flash function to take pictures clearly in low light:

1.With the phone open and in Camera mode, select Options (right softkey).

2.Select Flash and press .

3.Select an option from the following and press .

On This Shot to activate the flash for one shot.

On Always to activate the flash all the time.

4.Take a picture by using the phone’s main LCD as a viewfinder.

To deactivate this feature, select Off during step 3.

Tip: The flash function will automatically be Off when you take a picture with the clamshell closed.

Setting the Self-timer

To activate the Self-timer and get yourself in on the picture:

1.With the phone open and in Camera mode, select Options (right softkey).

2.Highlight Self-timerand press .

3.Highlight the length of delay you want the timer to use

(10 Seconds or 5 Seconds) and press .

4.Press Start (left softkey) when you are ready to start the timer. ( appears on the lower left portion of the main LCD during the Self-timer countdown.)

5.Get ready for the picture. When the timer is down to three seconds, the Self-timer icon will turn red and the phone will begin to beep.

To cancel the Self-timer after it has started:

Press Cancel (right softkey).

Note: While the Self-timer is active, all keys are disabled except,, and Cancel (right softkey).

Tip: You can also activate the Self-timer in Video mode with same steps.

Section 2: Understanding Your PCS Phone

2J: Using Your Phone’s Camera 138