Sanyo VM4500 Using the Speakerphone, Answering a Roam Call With Call Guard Enabled, Ending a Call

Answering a Roam Call With Call Guard Enabled

To answer a call when you are roaming and Call Guard is enabled:

1.Press or . (The following message will appear: “Roaming rate applies. Please press [1] to accept.”)

2.Press to answer the call.

Note: If your phone is off, in an active PCS Vision Connection, or on a PCS Ready Link call, incoming calls go to voicemail.

Ending a Call

To disconnect a call when you are finished:

With the Flip Open:

Close the phone or press . With the Flip Closed:

Press and hold .

Note: If the setting for Close Flip is not set to “end call,” closing the phone will not end the call. (See “Setting the Open/Close Flip Option” on page 62.)

Tip: Time/Date is displayed when you press while the phone is in use.

Using the Speakerphone

The speakerphone feature lets you hear audio through the speaker and talk without holding the phone. When the speakerphone is activated, use the volume control keys on the side of the phone to adjust the volume.

To turn the speakerphone on during a call:

Press .

– or –

Press , highlight Speaker On, and press .

To turn the speakerphone off during a call:

Press .

– or –

Press , highlight Speaker Off, and press .

Section 2: Understanding Your PCS Phone

2A:Your PCS Phone – The Basics 18