Patton electronic 2172A CE Declaration of Conformity, Authorized European Representative, Service

Page 5

of Part 15 of FCC rules, which are designed to provide reasonable pro- tection from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular instal- lation. If the device does cause interference to radio or television recep- tion, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the follow- ing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

This device conforms to the requirements of Council Directive 2004/108/EC on the approximation of the laws of the member states relating to electromagnetic compatibility; and Council Directive 2006/95/EC on the approximation of the laws of the member states relat- ing to electrical equipment designed for use within certain voltage limits.

The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the above directive is indicated by CE mark on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon,

Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Tel: +1 (301) 975-1007

Email: support@patton.com

URL: http://www.patton.com

Note Packages received without an RMA number will not be accepted.

5

Image 5
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Radio and TV Interference FCC Part Warranty InformationRegulatory Information Authorized European Representative ServiceCE Declaration of Conformity Safety When Working with Electricity Page Description FeaturesGeneral Information Typical application InstallationModel 2172A standalone rear panel Connecting the TWISTED-PAIR Line InterfaceModel 2172A RJ-45 twisted pair line interface Connecting the 10/100BASE-T Ethernet InterfaceConfiguring the Hardware DIP Switches Connecting PowerConfiguration Front Operation Configuring DIP Switch S1Power UP LED Front Panel LED Status MonitorsPower Supply LED Status IndicatorsTemperature Range DimensionsBase Models Appendix BCopperlink Interface Appendix C10/100BASE-T Interface Appendix D Copyright Patton Electronics Company All Rights Reserved