Patton electronic 2172A user manual Installation, Typical application

Page 9

Figure 1. Typical application

The pair of 2172A models work together to create a transparent extension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application.

3.0 INSTALLATION

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

To install the 2172A Ethernet Extender, do the following:

1.Connect the line interface between the units (refer to section 3.1, “Connecting the Twisted-Pair Line Interface” on page 10)

Note See Figure 2 for the standalone unit’s rear panel arrangements.

2.Connect the Ethernet interface (refer to section 3.2, “Connecting the 10/100Base-T Ethernet Interface” on page 11).

3.Connect the power plug (refer to section 3.3, “Connecting Power” on page 12).

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Warranty Information Regulatory InformationRadio and TV Interference FCC Part Service CE Declaration of ConformityAuthorized European Representative Safety When Working with Electricity Page Features General InformationDescription Typical application InstallationModel 2172A standalone rear panel Connecting the TWISTED-PAIR Line InterfaceModel 2172A RJ-45 twisted pair line interface Connecting the 10/100BASE-T Ethernet InterfaceConnecting Power ConfigurationConfiguring the Hardware DIP Switches Front Configuring DIP Switch S1 Power UPOperation LED Front Panel LED Status MonitorsPower Supply LED Status IndicatorsTemperature Range DimensionsBase Models Appendix BAppendix C 10/100BASE-T InterfaceCopperlink Interface Appendix D Copyright Patton Electronics Company All Rights Reserved
Top Page Image Contents