Patton electronic 2174 Connecting Power, Configuration, Configuring the Hardware DIP Switches

Page 13

3.3 CONNECTING POWER

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

The Model 2174 does not have a power switch, so it powers up as soon as it is plugged in.

An external AC or DC power supply is available separately. This connec- tion is made via the barrel jack on the rear panel of the Model 2174. No configuration is necessary for the power supply (See Appendix B for domestic and international power supply and cord options).

DC power (supplied via the power supply jack to the 2174) must meet the following requirements; DC power supplied must be regulated 12VDC ±5%, 1.0A minimum. Center pin is +12V. The barrel type plug has a 2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.

4.0 CONFIGURATION

The Model 2174 has eight DIP switches (S1) for configuring the unit for a wide variety of applications. This section describes switch locations and explains the different configurations.

4.1 CONFIGURING THE HARDWARE DIP SWITCHES

The DIP switches are externally accessible from the underside of the Model 2174. Figure 6 on page 14 shows the orientation of the DIP switches in the On and Off positions.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User Manual Contents Line Rate & Reach Chart, Based on 24 AWG 0.5 MM Regulatory Information Warranty InformationPstn Radio and TV Interference FCC PartCE Declaration of Conformity ServiceAuthorized European Representative Tel +1 301 Email support@patton.comMust have an earth ground Safety When Working with ElectricityPage General Information FeaturesDescription Typical application InstallationModel 2174 rear panel options Connecting the Line Interface for Model 2174/EUI or 2174/TB Connecting the Line InterfaceConnecting the 10/100BASE-T Ethernet Interface Connecting the Line Interface for Model 2174/BNCConfiguration Connecting PowerConfiguring the Hardware DIP Switches Position Description Configuring DIP Switch S1S1-1 Setting Switch S1-1 Local/Remote ConfigurationSwitches S1-2 and S1-3 Symmetric/Asymmetric Operation S1-2 S1-3 SettingFront Panel LED Status Monitors OperationLED Power Supply LED Status IndicatorsTemperature Range DimensionsPatton Model # Description Appendix B10/100BASE-T Interface Appendix CRJ-45 Copperlink InterfaceAppendix D Mode Distance in Feet Mbps Long RangeMode Distance in Feet Mbps High Speed Page Page Copyright Patton Electronics Company All Rights Reserved

2174 specifications

The Patton Electronics 2174 is a versatile and robust device widely recognized for its capability to facilitate seamless connectivity in various communication environments. Designed specifically to serve the demands of both business and industrial applications, this equipment excels in providing reliable data transmission over long distances.

One of the main features of the Patton 2174 is its advanced DSL technology. It effectively supports ADSL and VDSL standards, enabling high-speed internet connections essential for modern networking needs. This feature is particularly beneficial for businesses that require fast and reliable internet access to maintain productivity and efficiency.

The device is equipped with a user-friendly web interface, allowing for effortless configuration and management. This intuitive interface empowers users to easily set up and monitor their connections without the need for specialized technical knowledge. In addition, the unit supports SNMP for network management, allowing IT professionals to monitor the device remotely, troubleshoot efficiently, and optimize performance.

The Patton 2174 boasts enhanced security features, including support for various encryption protocols. This ensures that data transmitted over the network is protected from unauthorized access, a crucial characteristic for organizations handling sensitive information.

Another notable attribute of the Patton 2174 is its robust build quality. Designed for durability, the device is capable of operating in a wide range of environmental conditions. This durability makes it suitable for both indoor and outdoor deployments, further extending its versatility.

The device also supports Power over Ethernet (PoE), allowing it to receive power through the network cable, simplifying installation by eliminating the need for additional power sources. This feature is especially advantageous in remote locations where access to power outlets is limited.

In terms of connectivity, the Patton 2174 includes multiple Ethernet ports, offering flexibility for integration into existing systems. Its capability to support both point-to-point and point-to-multipoint configurations makes it an excellent choice for various networking topologies.

Overall, the Patton Electronics 2174 stands out as a reliable, feature-rich solution for businesses and organizations seeking to enhance their communication infrastructure. With its combination of advanced technology, user-friendly management capabilities, and robust design, it represents a significant investment in the future of connectivity.
Top Page Image Contents