Patton electronic 2174 user manual Installation, Typical application

Page 9

Figure 1. Typical application

The pair of 2174 models work together to create a transparent extension between two peered Ethernet LANs using twisted pair (2-wire), Cat5+, or 75-ohm BNC. Figure 1 shows a typical point-to-point application.

3.0 INSTALLATION

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

To install the 2174 Ethernet Extender, do the following:

1.Connect the line interface between the units (refer to section 3.1, “Connecting the Line Interface” on page 11)

Note See Figure 2 for the Model 2174’s rear panel arrangements.

2.Connect the Ethernet interface (refer to section 3.2, “Connecting the 10/100Base-T Ethernet Interface” on page 12).

3.Connect the power plug (refer to section 3.3, “Connecting Power” on page 13).

Image 9

Contents User Manual Contents Line Rate & Reach Chart, Based on 24 AWG 0.5 MM Regulatory Information Warranty InformationPstn Radio and TV Interference FCC PartCE Declaration of Conformity ServiceAuthorized European Representative Tel +1 301 Email support@patton.comMust have an earth ground Safety When Working with ElectricityPage Features General InformationDescription Typical application InstallationModel 2174 rear panel options Connecting the Line Interface for Model 2174/EUI or 2174/TB Connecting the Line InterfaceConnecting the 10/100BASE-T Ethernet Interface Connecting the Line Interface for Model 2174/BNCConnecting Power ConfigurationConfiguring the Hardware DIP Switches Position Description Configuring DIP Switch S1S1-1 Setting Switch S1-1 Local/Remote ConfigurationSwitches S1-2 and S1-3 Symmetric/Asymmetric Operation S1-2 S1-3 SettingOperation Front Panel LED Status MonitorsLED Power Supply LED Status IndicatorsTemperature Range DimensionsPatton Model # Description Appendix B10/100BASE-T Interface Appendix CRJ-45 Copperlink InterfaceAppendix D Mode Distance in Feet Mbps Long RangeMode Distance in Feet Mbps High Speed Page Page Copyright Patton Electronics Company All Rights Reserved

2174 specifications

The Patton Electronics 2174 is a versatile and robust device widely recognized for its capability to facilitate seamless connectivity in various communication environments. Designed specifically to serve the demands of both business and industrial applications, this equipment excels in providing reliable data transmission over long distances.

One of the main features of the Patton 2174 is its advanced DSL technology. It effectively supports ADSL and VDSL standards, enabling high-speed internet connections essential for modern networking needs. This feature is particularly beneficial for businesses that require fast and reliable internet access to maintain productivity and efficiency.

The device is equipped with a user-friendly web interface, allowing for effortless configuration and management. This intuitive interface empowers users to easily set up and monitor their connections without the need for specialized technical knowledge. In addition, the unit supports SNMP for network management, allowing IT professionals to monitor the device remotely, troubleshoot efficiently, and optimize performance.

The Patton 2174 boasts enhanced security features, including support for various encryption protocols. This ensures that data transmitted over the network is protected from unauthorized access, a crucial characteristic for organizations handling sensitive information.

Another notable attribute of the Patton 2174 is its robust build quality. Designed for durability, the device is capable of operating in a wide range of environmental conditions. This durability makes it suitable for both indoor and outdoor deployments, further extending its versatility.

The device also supports Power over Ethernet (PoE), allowing it to receive power through the network cable, simplifying installation by eliminating the need for additional power sources. This feature is especially advantageous in remote locations where access to power outlets is limited.

In terms of connectivity, the Patton 2174 includes multiple Ethernet ports, offering flexibility for integration into existing systems. Its capability to support both point-to-point and point-to-multipoint configurations makes it an excellent choice for various networking topologies.

Overall, the Patton Electronics 2174 stands out as a reliable, feature-rich solution for businesses and organizations seeking to enhance their communication infrastructure. With its combination of advanced technology, user-friendly management capabilities, and robust design, it represents a significant investment in the future of connectivity.