Patton electronic 2150 Appendix a, LAN Connection, Transmission Line, Copperlink Distance

Page 16

APPENDIX A

SPECIFICATIONS

A.1 LAN CONNECTION

•Two shielded RJ-45, 10/100Base-T, IEEE 802.3 Ethernet

•CopperLINK Connection: Shielded RJ-45

A.2 TRANSMISSION LINE

Two-wire unconditioned twisted pair.

A.3 COPPERLINK DISTANCE

• Distance: 5,000 (1.5 km) at 10 Mbps upstream/10 Mbps downstream

Note Distances depend on selected line rate and line conditions. See Appendix D on page 19 for details.

A.4 LED STATUS INDICATORS

•Power (Green)

•CopperLINK: Link (Green)

•Ethernet: Link (Green) & Activity (Flashing Green)

•Remote (Green)

•Local (Green)

A.5 POWER SUPPLY

External AC and DC options:

•AC: 120 VAC, 220 VAC, and UI (120–240 VAC)

•DC: 12 VDC, 24 VDC and 48 VDC

•Power consumption: 860mA at 5V

A.6 TEMPERATURE RANGE

0–40°C

A.7 HUMIDITY

Up to 90% non-condensing.

A.8 DIMENSIONS

1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm)

16

Image 16

Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Warranty Information Low-Voltage Direcive SafetyRegulatory Information EMC DirectiveService CE Declaration of ConformityAuthorized European Representative Tel +1 301 Email support@patton.comSafety When Working with Electricity Must have an earth groundPage General Information FeaturesDescription Installation Typical applicationConnecting the TWISTED-PAIR Line Interface Model 2150 standalone rear panelConnecting the 10/100BASE-T Ethernet Interface Model 2150 RJ-45 twisted pair line interfaceConfiguration Connecting PowerConfiguring the Hardware DIP Switches Front Rear Power UP Configuring DIP Switch S1Operation Front Panel LED Status Monitors LED Status Indicators Power SupplyTemperature Range DimensionsAppendix B Patton Model # DescriptionAppendix C 10/100BASE-T InterfaceRJ-45 Copperlink InterfaceAppendix D SecondCopyright Patton Electronics Company All Rights Reserved