Patton electronic 2150 CE Declaration of Conformity, Authorized European Representative, Service

Page 5

tion. The device has been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable pro- tection from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular instal- lation. If the device does cause interference to radio or television recep- tion, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the follow- ing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC relating to electromagnetic compatibility and Directive 2006/95/EC relating to electrical equipment designed for use within cer- tain voltage limits. The Declaration of Conformity may be obtained from Patton Electronics, Inc at www.patton.com/certifications.

The safety advice in the documentation accompanying this device shall be obeyed. The conformity to the above directive is indicated by CE mark on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon, Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Tel: +1 (301) 975-1007

Email: support@patton.com

URL: http://www.patton.com

Note Packages received without an RMA number will not be accepted.

5

Image 5
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Low-Voltage Direcive Safety Warranty InformationRegulatory Information EMC DirectiveCE Declaration of Conformity ServiceAuthorized European Representative Tel +1 301 Email support@patton.comMust have an earth ground Safety When Working with ElectricityPage Description FeaturesGeneral Information Typical application InstallationModel 2150 standalone rear panel Connecting the TWISTED-PAIR Line InterfaceModel 2150 RJ-45 twisted pair line interface Connecting the 10/100BASE-T Ethernet InterfaceConfiguring the Hardware DIP Switches Connecting PowerConfiguration Front Rear Operation Configuring DIP Switch S1Power UP Front Panel LED Status Monitors Power Supply LED Status IndicatorsTemperature Range DimensionsPatton Model # Description Appendix B10/100BASE-T Interface Appendix CRJ-45 Copperlink InterfaceSecond Appendix DCopyright Patton Electronics Company All Rights Reserved