Patton electronic 2710 Supported Applications, as the Interface between the Telco and CPE

Page 5

2.3 SUPPORTED APPLICATIONS

The NetLink-T1™ CSU/DSU provides a T1 (DS1) network termi- nation between the service provider and customer premises equipment (CPE) such as a router. The Netlink-T1™ can also be used as a high- speed short haul modem for campus applications.

2.3.1 The 2710 as the Interface between the Telco and CPE

The NetLink-T1™ provides the interface between the service provider and customer equipment, such as a router or switch (See below).

Model 2710

Router

T1

 

Network

LAN

1.544Mbps or nx56/64

2.3.2 The 2710 as a High-Speed Short Range Modem

The NetLink-T1™ can also be installed into high-speed campus applications. In this application, a pair of NetLink-T1™ units operate as short range modems (See below).

NetLink-T1™

Model 2710s

Model 2700

1.544MBps or nx56/64

Model 2700

Up to 6000 Feet

(1.83 km)

3.0 CONFIGURATION

The Model 2710 features configuration capability via hardware switches or a software control port. This section describes all possible hardware and software switch configurations of the NetLink-T1™.

3.1 DIP SWITCH CONFIGURATION

The Model 2710 has eight internal DIP switches that allow configu- ration for a wide range of applications. The eight switches are accessed by opening the plastic case with a small screwdriver. Figure 1 (below) shows the location of the DIP switches on the bottom of the printed circuit board.

Software Configuration Port

 

DIP Switches

 

 

 

ON

ON

1 2 3 4 5 6 7 8

OFF

Figure 1. Model 2710 Series bottom view, showing location of DIP switches

The Model 2710 DIP switches (Switches SW1 - SW8) can be con- figured as either “On” or “Off”. Figure 2 (below) shows the orientation of the DIP switches with respect to ON/OFF positions.

ON

ON

1 2 3 4 5 6 7 8

OFF

Figure 2. Close up of DIP switches showing ON/OFF positions.

Default positions for Switches SW1-SW8 are shown in the table on the following page. Descriptions of each switch follow the table.

7

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User Manual Warranty Statement Table of ContentsGeneral Information CE NoticeFCC Information Radio and TV InterferenceFCC Compliance Industry Canada NoticeFeatures Service InformationTel 301 Email support@patton.com Monday through FridayDIP Switch Configuration ConfigurationSupported Applications 2710 as the Interface between the Telco and CPESwitches SW1, SW2, and SW3 Switch SET Summary TableSwitch SW4 Line Framing and Coding Line Framing OptionsSwitches SW7 and SW8 Line Build Out Switch SW6 Clock ModeSoftware Configuration VT100Helpful Hints Introduction to Main MenuLine FormatESF default Options ESF, D4, Unframed System ConfigurationDS0 Line Rate 64kbps default Options 64kbps, 56kbps Line Coding B8ZS default Options AMI, B8ZS, B7ZSESF Data Link Ansi T1.403 Options Ansi T1.403, AT&T TR54016 ESF Carrier Loops Enabled default Options Enabled, DisabledOptions Network, Internal, External Default Config Source Eeprom Option EEPROM, Switch 54 Loops Enabled default Options Enabled, DisabledLocal Loop Idle default System DiagnosticsRemote Loop Idle default SpacebarError Insertion Off default Options On, Off Test Pattern Idle default Options Idle or SendingSelected Pattern NI StatusCurrent DIP Switch Settings Error CountersValid Interval Count & Current Interval Time Rx PRMLoop Timeout PasswordSet to Default Configuration Service InformationNetwork Interface Connection Power ConnectionDTE Interface Connection TXD LED DescriptionsRXD LOSOperating Local Loopback LL Loop V.54 & Telco DiagnosticsOperating Remote Digital Loopback RL Central Office LoopsQrss BIT Error Rate V.52 DiagnosticsPatton NETLINK-T1 Model Specifications Patton Model # Description Wire Gauge Capacitance ResistancePatton NETLINK-T1 Model Cable Recommendations Patton NETLINK-T1 Model Interface PIN Assignment Jumper Position for Power via Pin KK Patton NETLINK-T1 Model Power Supply InterfaceJumper Position for Power via DC Power Jack default

2710 specifications

The Patton Electronic 2710 is a versatile IoT (Internet of Things) device that has garnered attention for its robust capabilities in facilitating reliable communication and seamless data transmission. Tailored for various industrial applications, this product stands out with its blend of cutting-edge technologies and practical features, making it an essential tool for businesses looking to enhance their connectivity infrastructure.

One of the main features of the Patton 2710 is its multi-interface support. This device is equipped with a variety of ports, including serial interfaces like RS-232, RS-485, and RS-422, as well as Ethernet and USB connectivity options. This versatility allows it to connect seamlessly with different devices and systems, from legacy equipment to modern networked devices, enabling efficient data exchange and communication across a variety of protocols.

The Patton 2710 also boasts robust protocol support, including various telecommunications and networking protocols such as TCP/IP, UDP, and SNMP. This extensive compatibility ensures that it can operate effectively in diverse environments, whether in a factory setting monitoring machinery or in a smart city application controlling infrastructure systems. With its support for these protocols, users can implement advanced monitoring and management solutions, improving operational efficiency and reducing downtime.

In terms of technology, the Patton 2710 features advanced security measures that safeguard the integrity of the data being transmitted. With built-in encryption and secure communication protocols, users can rest assured that their sensitive information remains protected against potential cyber threats. This is increasingly important in today's digitally interconnected landscape, where data breaches can have serious repercussions.

The device is also designed for ease of use and installation. Its intuitive web-based management interface simplifies configuration and monitoring, allowing users to set up the device quickly without extensive technical knowledge. This user-friendly design empowers organizations to implement the device across their operations with minimal training and support.

Another significant characteristic of the Patton 2710 is its rugged build quality. Designed to withstand harsh industrial environments, the device is often housed in enclosures that protect it from dust, moisture, and extreme temperatures. This durability ensures that it can operate reliably in demanding conditions, making it suitable for a wide range of industries, from manufacturing to transportation.

In summary, the Patton Electronic 2710 stands out as a powerful tool for enhancing connectivity and facilitating IoT applications. With its multi-interface capabilities, robust protocol support, advanced security features, user-friendly design, and rugged build, it provides businesses with the reliable solutions they need to thrive in an increasingly connected world.
Top Page Image Contents