Patton electronic 3088A Typographical conventions used in this document, General observations

Page 13

Model 3088A Series Getting Started Guide

Electrostatic Discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent

CAUTION failures. Do the following to prevent ESD:

•Always follow ESD prevention procedures when removing and replacing cards.

•Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely channel unwanted ESD voltages to ground.

•To properly guard against ESD damage and shocks, the wrist strap and cord must operate effectively. If no wrist strap is available, ground yourself by touching the metal part of the chassis.

General observations

•Clean the case with a soft slightly moist anti-static cloth

•Place the unit on a flat surface and ensure free air circulation

•Avoid exposing the unit to direct sunlight and other heat sources

•Protect the unit from moisture, vapors, and corrosive liquids

Typographical conventions used in this document

This section describes the typographical conventions and terms used in this guide.

General conventions

The procedures described in this manual use the following text conventions:

 

 

Table 1. General conventions

 

 

 

 

Convention

 

 

Meaning

 

 

 

Garamond blue type

Indicates a cross-reference hyperlink that points to a figure, graphic, table, or sec-

 

tion heading. Clicking on the hyperlink jumps you to the reference. When you

 

have finished reviewing the reference, click on the Go to Previous View

 

button

 

in the Adobe® Acrobat® Reader toolbar to return to your starting point.

 

 

 

 

 

 

Futura bold type

Commands and keywords are in boldface font.

 

 

 

Futura bold-italic type

Parts of commands, which are related to elements already named by the user, are

 

in boldface italic font.

Italicized Futura type

Variables for which you supply values are in italic font

 

 

 

Futura type

Indicates the names of fields or windows.

Garamond bold type

Indicates the names of command buttons that execute an action.

 

 

 

 

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SHDSL.bis CPE with fixed serial interface Mailsupport@patton.com Summary Table of Contents Table of Contents Software Upgrade Compliance information Factory default values for software-configurable parameters List of Figures List of Tables Audience About this guideStructure Impaired functioning PrecautionsSafety when working with electricity General observations Typographical conventions used in this documentGeneral conventions Convention MeaningGeneral information Chapter contentsOnSite 3088A overview FeaturesSerial interface types External AC universal power supply Power input connectorExternal 48 VDC power supply Configuration Hardware DIP-switch configuration Software CLI configurationIntroduction Parameter Description Possible Values Lists the Model 3088A’s configurable parametersConfiguring the DIP switches DIP switch settings System reset modePosition Function Position Function CA, /D models ModelsS4-2 S4-3 S4-4 S4-5 S4-6 S4-7 S4-8 Data Rate kbps S4-2 through S4-8 Data Rate2240 Mode DCE/DTE operationClock Source Ethernet Management Port DSL Line Condition Good or Poor System Configuration Commands Help CommandsSystem Status Commands DSL Status Command DSL Configuration CommandsDSL Clear Errcntrs Command E1 Configuration CommandsRemote Console Example Command Line Interface Session3088A System set circuitid 3088A/K Circuit ID 3088A OnSite Plug ‘n’ PlayOnSite installation Connecting the twisted pair interface InstallationConnecting the Model 3088A to a DCE or DTE device Connecting the Model 3088A serial interfaceConnecting the Model 3088A/K to an E1 Network Connecting the Model 3088A/K serial interfaceConnect twisted pair 120 ohm to E1 network DSL Connecting dual coaxial cable 75 ohm to E1 networkExternal AC universal power supply Connecting powerTo Power Supply Jack DC PowerOperation Power Green Power-upLED status monitors DSL GreenTest modes Patterns Local Analog Loopback diagramRemote console operation Establishing a Remote Console Session How to ConnectLog in to 3088 Near End How to DisconnectRemote control session with LAL diagram Differences in Local and Remote Control Session BehaviorSoftware Upgrade Software Upgrade Reset configuration to factory defaults Reset configuration to factory defaults Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbersAppendix a Compliance information Compliance SafetyRadio and TV Interference FCC Part CE Declaration of ConformityAppendix B Specifications Diagnostics Serial connectorClocking modes DTE ratePower and power supply specifications ConfigurationLine coding Transmission lineLine interface Line rates DSL lineShdsl physical connection EnvironmentAppendix C Factory default values Parameter Default value Factory default values for software-configurable parametersHDB3 Appendix D Factory replacement parts and accessories Power Supplies Factory replacement parts and accessoriesPower Adapters Appendix E Interface pinouts Pin # Signal Designation Source Pin # SignalLine port RS-232 interfaceE1 interface InterfaceEthernet Console port Pin Signal
Related manuals
Manual 8 pages 13.2 Kb

3088A specifications

The Patton Electronics 3088A is a highly versatile and robust device designed to facilitate seamless communications over long distances using various transmission mediums. This model exemplifies the pinnacle of technology in the realm of serial-to-Ethernet devices, serving a multitude of applications in modern networking environments.

One of the standout features of the 3088A is its ability to convert RS-232, RS-422, and RS-485 serial signals into Ethernet TCP/IP data packets, allowing for the integration of legacy systems with contemporary Ethernet networks. This feature is crucial for businesses looking to modernize their infrastructure without discarding existing equipment that operates on serial protocols.

The 3088A boasts an impressive transmission range, which makes it suitable for both industrial and commercial applications. It supports data rates of up to 115.2 Kbps, ensuring that data can be transmitted quickly and efficiently. Additionally, with a built-in web server and a user-friendly interface, configuration and management become straightforward tasks, reducing the complexity often associated with network setups.

Another vital feature of the 3088A is its compatibility with various communication protocols, including TCP, UDP, and ARP. This flexibility ensures that it can be integrated into a wide range of network configurations, catering to specific application requirements, from simple point-to-point communication to complex networking setups.

The device also incorporates advanced security features, such as support for secure socket layer (SSL) connections, to safeguard data transmission against unauthorized access and potential threats. This is particularly important in environments where sensitive information is being transmitted, providing peace of mind for organizations concerned about data integrity and security.

Furthermore, the Patton 3088A is designed with durability in mind. It features a compact and rugged enclosure suitable for deployment in harsh environments, making it ideal for field operations and various industrial applications. The device supports wide power input ranges, ensuring operational stability regardless of fluctuating power conditions.

In summary, the Patton Electronics 3088A stands out as a reliable and efficient solution for those seeking to bridge the gap between serial and Ethernet communications. Its high-speed data transmission capabilities, extensive compatibility with various protocols, enhanced security features, and rugged design make it an essential tool for modern networking needs, enabling businesses to evolve while maximizing their existing technologies.
Top Page Image Contents