Patton electronic 2603, 2620 quick start Power up the router, Models with external AC adaptor

	• The IPLink 2603/2620 contains no user serviceable parts. The equip-
	ment shall be returned to Patton Electronics for repairs, or repaired
WARNING	by qualified service personnel.
	• An approved external power supply that incorporates a disconnect
	device shall be used and positioned within easy reach of the operator.
	• For AC powered units, the power cable used to connect the power
	supply shall meet all applicable standards for the country in which it
	is to be installed, and be connected to a wall outlet which has
	earth ground.
	• Hazardous network voltages are present in WAN ports regardless of
	whether power to the unit is ON or OFF. To avoid electric shock, use
	caution when near WAN ports. When detaching the cables, detach the
	end away from the 2603/2620 first.
	• Do not work on the system or connect or disconnect cables during
	periods of lightning activity.

1.0 Power up the router

The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability.

CAUTION

Your router comes with one of the following power supply options:

•External AC adaptor with included power cord

•Internal AC power supply

•Internal DC power supply—no power accessories are included

1.1 Models with external AC adaptor

1.Connect female plug of the AC power cord to the AC adaptor provided.

2.Connect the barrel-type connector of the AC adaptor to the barrel-type Power jack on the IPLink router.

3.Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).

1.2 Models with internal AC power supply

1.Insert the female end of the AC power cord into the internal power supply connector.

2.Connect the male end of the power cord into an AC power outlet (100–240 VAC).

2 IPLink 2603 & 2620 Quick Start Guide