There is a two minute
Note: The machine will continue operation in the mode it was in when the Menu was selected. However, the control keys will not be lit and are non- functional when the Manager’s Menu is displayed. The control keys are functional in the Manager’s Menu when the CURRENT CONDITIONS screen is displayed. (See CURRENT CONDITIONS on page 30.)
Entering Access Code
With the ACCESS CODE screen on the display, use the SEL symbol to set the first code number in the cursor position. When the correct number is selected, touch the SEL symbol to move the cursor to the next number position.
ENTER ACCESS CODE
8 | 3 | 0 | 9 |
__ |
|
|
|
Continue to enter the proper access code numbers (8309) until all four numbers are displayed, then touch the SEL symbol. The Manager's Menu list will display on the screen, provided the correct access code is entered.
If an incorrect number is entered for the access code, the display will exit the Menu program when the SEL symbol is touched.
Figure 11
Manager Menu Options
Touch the ARROW symbols to move up or down through the Menu. Select a Menu option by touching the SEL symbol. Exit the Menu program by selecting EXIT FROM MENU or touch the CONE symbol.
The following menu options are listed in the Manager's Menu.
SERVINGS COUNTER
SET CLOCK
AUTO HEAT TIME
STANDBY MODE
MIX LEVEL AUDIBLE
FAULT DESCRIPTION
LOCKOUT HISTORY
HEAT CYCLE SUMMARY
HEAT CYCLE DATA
CURRENT CONDITIONS
NET SERVICE PIN
Exit From Menu
Selecting “EXIT FROM MENU” will exit the Manager's Menu and the return the control panel symbols to normal operation.
Servings Counter
The SERVINGS COUNTER screen is used to check or reset the number of servings dispensed from the machine. The SERVINGS COUNTER will automatically reset to zero when the machine is brush cleaned.
SERVINGS COUNTER
Draws | 0 |
> Next |
|
140131
Models C709 & C717 | 23 | Important: To the Operator |
|
|
|