Taylor Model C709 Freezer Door Assembly Contd Step, Models C709 & C717, Operating Procedures

Model C709 Freezer Door Assembly (Cont'd.)

Step 2

Slide the three o-rings into the grooves on the draw valve and lubricate. (See Figure 17.)

Figure 17

Step 3

Lightly lubricate the inside of the top of the freezer door valve cavity. (See Figure 18.)

Figure 18

Step 4

Insert the draw valve from the top, with the draw handle slot facing forward. (See Figure 19.)

Figure 19

Step 5

Insert the baffle rod through the beater in the freezing cylinder. With the door seated on the freezer studs, install the handscrews, with the longer ones on top. Tighten equally in a criss-cross pattern to insure the door is snug. (See Figure 20.)

Figure 20

Step 6

Position the draw handle with the adjustment screw facing down. Slide the fork of the draw handle into the slot of the draw valve. Secure with pivot pin. (See Figure 21.)

Figure 21

Models C709 & C717 33 Operating Procedures