Taylor Model C717 Freezer Door Assembly Contd Step, Operating Procedures, Models C709 & C717

Model C717 Freezer Door Assembly (Cont'd.)

Step 8

Slide the pivot pin through the draw handles as the handles are inserted into the draw valves.

Figure 30

Note: This freezer features adjustable draw handles to provide portion control, giving a better consistent quality to your product and controlling costs. The draw handles should be adjusted to provide a flow rate of 5 to 7-1/2 oz. (142 g. to 213 g.) of product by weight per 10 seconds.

To INCREASE the flow rate, turn the adjustment screw CLOCKWISE. To DECREASE the flow rate, turn the adjustment screw COUNTER-

CLOCKWISE.

Step 9

Snap the design caps over the bottom of the door spouts.

Step 10

Slide the long drip pan into the hole in the front panel. Slide the other two drip pans into the holes in the side panels. (See Figure 31.)

Figure 31

140121

Step 11

Install the front drip tray and splash shield under the door spouts. (See Figure 32.)

Figure 32

Feed Tube Assembly

Step 1

Slide the three o-rings into the grooves of the inner feed tube.

Figure 33

Operating Procedures 36 Models C709 & C717