Taylor C717, C709 Power Switch ON, International Models Only, Power Switch OFF, Heat Cycle Data

If Lockout Data is corrupted, all lockout history data is cleared. A “LOCKOUT CRC ERR” fault is displayed.

After the memory integrity has been tested, the Safety Timeout screen will be displayed.

Heat Cycle Data

Heat cycle data is checked separately from the rest of the data in memory. Each individual Heat Cycle Data record is monitored for corruption individually. At the start of a heat cycle, the next Heat Cycle data record is cleared and data for the heat cycle is written to it. The current Heat Cycle Data is displayed as the first heat cycle record in the HEAT CYCLE DATA menu option.

The heat cycle data records are checked for integrity when the record is accessed, presently only through the HEAT CYCLE DATA menu option.

(For additional Heat Cycle Data information, see page 28.)

Once the system has initialized, the number of days until brush cleaning is required is indicated on the control panel. The SAFETY TIMEOUT screen will be displayed with the alarm on for 60 seconds or until any control symbol is touched.

SAFETY TIMEOUT

ANY KEY ABORTS

Power Switch ON

When the power switch is placed in the ON position, the control panel touch keys become operative. The fluorescent display will be either blank or indicate that the unit has been cleaned.

UNIT CLEANED

International Models Only:

Some International models will continuously display the temperature of the mix hopper when the power switch is in the ON position.

HOPPER 21.0

UNIT CLEANED

Power Switch OFF

After the safety timeout has been completed and the power switch is OFF, the following screen is displayed.

POWER SWITCH OFF

- = - = - = - = - = -

UNIT CLEANED

If the control is set for international configuration, the following screen will appear when the heat symbol is touched.

ARE YOU SURE

>Yes No

Models C709 & C717 19 Important: To the Operator