Installation, Connect to the DTE Interface

4.0 INSTALLATION

The 2135 is equipped with DTE, Network, and power interfaces. This section briefly describes connnection to each interface.

4.1 CONNECT TO 10BASET ETHERNET PORT

The shielded RJ-45 Ethernet port on the Model 2135 is designed to connect directly to a 10BaseT network. Figure 3 shows the 10BaseT RJ-45 port pin description. You may make connections up to 3 feet using type 4 or 5 cable.

1 TD+ (data output from Ethernet)

2 TD- (data output from Ethernet)

3 RD+ (data input to Ethernet)

4 (no connection)

5 (no connection)

6 RD- (data input to Ethernet)

7 (no connection)

8 (no connection)

Figure 3. Model 2135 Ethernet connector pinout

4.1.1 Connect the 10BaseT Ethernet Port to a Hub

The Model 2135 10BaseT interface is configured as DTE

(Data Terminal Equipment). Use the diagram below to construct a cable to connect the 2135 to a 10BaseT Hub.

		2135 10BaseT Hub
RJ-45 Pin No.		RJ-45 Pin No.
1	(TX+)	1 (RX+)
2	(TX-)	2 (RX-)
3	(RX+)	3 (TX+)
6	(RX-)	6 (TX-)

4.1.2 Connect the 10BaseT Ethernet Port to a PC (DTE)

	2135 10BaseT DTE
RJ-45 Pin No.		RJ-45 Pin No.
1	(TX+)	1	(TX+)
2	(TX-)	2	(TX-)
3	(RX+)	3 (RX+)
6	(RX-)	6	(RX-)

4.2 CONNECT TO THE DTE INTERFACE

The DTE interface is a V.35 DTE (M/34 male connector), designed to plug directly into a DCE interface (See Appendix C V.35 Interface Pin Assignments).

4.3POWER CONNECTION

The Model 2135 offers either an AC or DC power supply.

4.3.1 AC Power Supply (100-240VAC)

The Model 2135 uses a 5VDC, 2A universal input 100-240VAC, power supply (center pin is +5V). The universal input power supply is equipped with a male IEC-320 connector. This power supply connects to the Model 2135 via a barrel jack on the rear panel. A variety of inter- national power cords are available for the universal power supply.

The Model 2135 powers up as soon as it is plugged into an AC outlet. The unit does not have a power switch.

4.3.2 DC Power

The 36-60 VDC DC to DC adapter is supplied with the DC version of the Model 2135. The black and red leads plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack on the 2135.

The Model 2135 10BaseT interface is configured as DTE (Data Terminal Equipment). To connect the 2135 to another DTE such as a 10BaseT network interface card in a PC, construct a 10BaseT crossover cable as shown in the diagram on the following page.

To Power

Supply Jack

Barrel power connector

MADEINCHINABYSUNNY	:G01234567890S/N	OUTPUTPOWER:5WMAX	OUTPUT:+5V1.0A	INPUT:36-60V0.2AMAX	MODEL:SYD1106-0505	SWITCHINGPOWERSUPPLY		To -48VDC
MADEINCHINABYSUNNY	:G01234567890S/N	OUTPUTPOWER:5WMAX	OUTPUT:+5V1.0A	INPUT:36-60V0.2AMAX	MODEL:SYD1106-0505	SWITCHINGPOWERSUPPLY	-Vin	Source
								Source

							+Vin

Black lead (-V)

Red lead (+V)

2135 specifications

The Patton Electronics 2135 is a versatile, high-performance VoIP gateway designed to facilitate seamless communication in both home and enterprise environments. This exceptional device offers a range of features tailored for reliable voice transmission while supporting various legacy systems and modern IP infrastructures.

One of the main features of the Patton 2135 is its robust support for multiple analog telephone and fax machines. Equipped with FXS ports, this gateway allows traditional telephony devices to connect to VoIP services, making the transition from conventional phone systems to VoIP easy and efficient. This is particularly important for businesses looking to modernize their communication platforms without expensive overhauls of existing hardware.

The 2135 incorporates advanced technologies, including SIP (Session Initiation Protocol) for call management, which provides flexibility and compatibility with a wide range of VoIP services. The device also supports various voice codecs, ensuring high-quality audio during calls while optimizing bandwidth usage. This features a built-in echo cancellation and noise suppression technology, which enhances voice clarity, even in challenging network conditions.

Another critical characteristic of the Patton 2135 is its ease of use and configurability. The device includes a user-friendly web-based interface for setup and management, enabling users to quickly configure settings according to their needs. Additionally, it supports remote management protocols, which allow for centralized administration and troubleshooting across multiple sites, further increasing its appeal for enterprises with distributed operations.

Security is a top priority in today's interconnected world, and the Patton 2135 addresses this with support for various encryption protocols including SRTP (Secure Real-Time Transport Protocol) and TLS (Transport Layer Security). These features ensure that voice communication remains safe and private, protecting sensitive information from potential breaches.

Lastly, the compact design of the Patton 2135 makes it easy to deploy in a variety of environments, from small office setups to larger organizational infrastructures. With its combination of advanced technology, user-friendly management options, and robust security features, the Patton Electronics 2135 VoIP gateway stands out as an ideal choice for anyone looking to enhance their communication capabilities. Whether for small businesses or larger enterprises, it offers efficient, scalable, and secure solutions to meet modern communication needs.