Operation

PATTON ELECTRONICS CO.

3060/V24

INSTALLATION AND OPERATIONS MANUAL

102001UA

CHAPTER 1 - OPERATION

The Patton 3060/V24 (MD-V.24/TCB) is a network enhancement accessory intended for high speed synchronous or asynchronous RS-232 modem, or port sharing applications. The 3060/ V24 (MD-V.24/TCB) allows for immediate expansion of a system without the requirement of additional communication lines. The 3060/V24 (MD-V.24/TCB) allows any combination of up to six RS-232 DCE or DTE devices to share a single RS-232 DCE or DTE high speed link in a point-to-point or multi-point polled network.

Channel Clocking

The Patton 3060/V24 (MD-V.24/TCB) is protocol transparent and operates in synchronous and asynchronous environments at data rates up to 76,800bps, depending on cable length and attached equipment. Clocking can be derived from the Master Port clock, (pins 15 or 24 for TXC and 17 for RXC), the internal clock generator or any Sub-Channel clock, (pins 15 or 24 for TXC and 17 for RXC).

Fallback Clocking

In the event of loss of an externally provided clock or optionally Sub-Channel 1 DCD becoming inactive, the 3060/V24 (MD-V.24/TCB) has the ability to automatically fall back to the predetermined internal baud rate clock or the Sub-Channel 6 RX Clock (pin 17).

Channel Interface

The 3060/V24 (MD-V.24/TCB) has seven DB-25 female connectors located on the rear of the unit. Each port is DCE/DTE selectable, which eliminates the need for crossover cables. DSR or DTR can additionally be forced to the active state individually on each Sub-Channel by Jumper control.

1-1

3060/V24 specifications

The Patton Electronic 3060/V24 is a cutting-edge digital communication solution that caters specifically to the need for versatile data transmission in various environments. This device is particularly well-suited for applications in enterprises, telecommunication networks, and industrial settings, delivering robust performance and reliability.

One of the standout features of the Patton Electronic 3060/V24 is its ability to support multiple protocols, making it highly adaptable to different communication standards. This flexibility ensures seamless integration into existing networks without the need for extensive changes or overhauls. Its support for synchronous and asynchronous data communication allows for efficient data transmission and enhances compatibility with legacy systems.

The device is equipped with advanced error correction technologies, ensuring the integrity and reliability of data during transmission over various mediums, including leased lines and IP networks. The use of sophisticated coding algorithms minimizes data loss and maximizes throughput, which is essential for businesses relying on critical communications.

In terms of characteristics, the Patton Electronic 3060/V24 boasts a user-friendly interface, simplifying configuration and management. With its intuitive web interface and SNMP support, network administrators can easily monitor performance metrics and troubleshoot issues in real-time. This ease of management helps reduce downtime and improves overall operational efficiency.

Moreover, the Patton Electronic 3060/V24 is designed with scalability in mind. It can easily expand to accommodate growing network demands, making it an ideal choice for organizations planning to future-proof their communication infrastructure. The device supports both copper and fiber connections, providing enhanced options for connectivity depending on the specific requirements of the deployment environment.

Power over Ethernet (PoE) capability further enhances its utility by allowing the device to receive power through the Ethernet cable, reducing the need for additional power outlets and simplifying installation in hard-to-reach areas.

In conclusion, the Patton Electronic 3060/V24 stands out as a versatile and reliable communication device that integrates advanced technologies to meet the demands of modern networks. Its flexibility, ease of management, and robust performance make it an ideal solution for businesses seeking to enhance their communication capabilities while ensuring reliability and efficiency.