Patton electronic 3060/V24 manual

Page 8

PATTON ELECTRONICS CO.

3060/V24

INSTALLATION AND OPERATIONS MANUAL

102001UA

Channel Tail Circuits

A buffer is built into the unit for tail circuit (DCE to DCE) applications. An 8 bit centered ring buffer is used to correct the clock phasing errors generated between the Modem on the Master Port and the Sub-Channel port for the data transferred from the Sub-Channel to the Master Port. If the unit is operated in an asynchronous environment the buffer must be bypassed. This is accomplished by moving the SYNC/ASYNC switch to ASYNC.

Interface Connections

All connections are made via industry standard EIA RS-232 DB-25 female connectors located on the rear of the unit. The Following interface leads are implemented, Chassis (1), TXD (2), RXD (3), RTS (4), CTS (5), DSR (6), Sig Gnd (7), DCD (8), Plus Unreg (9), Minus Unreg (10), TXC (15), RXC (17), DTR (20), XTXC (24). Pins 9 & 10 can be disabled by Jumpers on the PCB.

Front Panel LEDs

Front panel LEDs are provided to indicate power is applied, RXD and TXD activity from the Master Port, Sub-Channel activity of each individual Port, Anti-Stream condition of each Sub- Channel and an indication of clock Fallback condition.

Channel Enable / Disable Switches

Front panel switches allow operator intervention to remove an individual Sub-Channel from accessing the Master Port. Positive latching type switches are provided for each Sub- Channel port for isolating or removing a streaming terminal. The Sub-Channel is activated by pushing the switch until it is in the “IN” position. The switch will indicate GREEN in color. To disable a Sub-Channel push the switch until it locks in the “OUT” position, the switch will indicate BLACK in color. Disabling a Sub-Channel with the front panel does not prevent the Sub-Channel from receiving data from the Master Port only from sending data to the Master Port.

Power Supply

A linear power supply is located internally, an external 110/220VA switch is located on the rear of the unit. If chassis ground and signal ground need to be tied together this can also be accomplished by switch selection. The unit is Rackmountable for 19" or 23" cabinets, by ordering an optional Rackmount Kit. Safety approvals granted are UL, CSA and TÜV as well as emission approval for FCC Class A.

OPERATION

1-4

Image 8
Contents 3060/V24 Warranty Notice Copyright NoticeProprietary Notice Publication NoticeEmission Requirements FCC Class a Canadian Emissions Contents Operation 3060/V24 3060/V24 3060/V24 Voltage for your country. Example Switch 24 All to on OFF OFF Chan 6 RXC SW21-4 SW21-5 SW21-6 Source Master OFF Channel Jumper 3060/V24 DB-25 RS-232 Channel Port is a DTE Master Port is a DCE Channel Port is a DCE Technical Specifications TimingPort Enabled = Green Sales 301 975-1000 Support 301

3060/V24 specifications

The Patton Electronic 3060/V24 is a cutting-edge digital communication solution that caters specifically to the need for versatile data transmission in various environments. This device is particularly well-suited for applications in enterprises, telecommunication networks, and industrial settings, delivering robust performance and reliability.

One of the standout features of the Patton Electronic 3060/V24 is its ability to support multiple protocols, making it highly adaptable to different communication standards. This flexibility ensures seamless integration into existing networks without the need for extensive changes or overhauls. Its support for synchronous and asynchronous data communication allows for efficient data transmission and enhances compatibility with legacy systems.

The device is equipped with advanced error correction technologies, ensuring the integrity and reliability of data during transmission over various mediums, including leased lines and IP networks. The use of sophisticated coding algorithms minimizes data loss and maximizes throughput, which is essential for businesses relying on critical communications.

In terms of characteristics, the Patton Electronic 3060/V24 boasts a user-friendly interface, simplifying configuration and management. With its intuitive web interface and SNMP support, network administrators can easily monitor performance metrics and troubleshoot issues in real-time. This ease of management helps reduce downtime and improves overall operational efficiency.

Moreover, the Patton Electronic 3060/V24 is designed with scalability in mind. It can easily expand to accommodate growing network demands, making it an ideal choice for organizations planning to future-proof their communication infrastructure. The device supports both copper and fiber connections, providing enhanced options for connectivity depending on the specific requirements of the deployment environment.

Power over Ethernet (PoE) capability further enhances its utility by allowing the device to receive power through the Ethernet cable, reducing the need for additional power outlets and simplifying installation in hard-to-reach areas.

In conclusion, the Patton Electronic 3060/V24 stands out as a versatile and reliable communication device that integrates advanced technologies to meet the demands of modern networks. Its flexibility, ease of management, and robust performance make it an ideal solution for businesses seeking to enhance their communication capabilities while ensuring reliability and efficiency.