OFF Chan 6 RXC | Patton electronic 3060/V24 specification

PATTON ELECTRONICS CO.

3060/V24

INSTALLATION AND OPERATIONS MANUAL

102001UA

Control Turn-Off Delay in "DATA" Switching Mode (SW23-1,2)

When configured to switch on DATA, switch SW23-1 and 2 set the Sub-Channel release time in clocks. The value selected is the number of clocks at the current baud rate that must occur without any data transitions on the Sub-Channel to indicate that Sub-Channel has completed its transmission and the 3060/V24 (CTS MD-V.24/TCB) can resume servicing the other Sub- Channels. The following table should be used to set this time period.

SW23-1 SW23-2 CLOCKS

ON	ON	16

ON	OFF	64

OFF	ON	256

OFF	OFF	2048

Switch on Data / Control (SW25-1,2,3,4,5,6)

Each sub-channel is independently selectable for switch on data or switch on an active interface control lead. Set SW25 pos 1 to OFF if sub-channel 1 switch on Data is required. Set pos 1 to ON if switch on interface control lead is desired. Position 2 thru 6 are associated with sub-channels 2 thru 6.

Internal Baud Rates (SW22-4,5,6,7)

Switch SW22-4, 5, 6 and 7 select the master clock rate when Internal Clock Source is selected on TX Clock Source or RX Clock Source. In addition the Fallback clock rate is also selected with this option. When Fallback clocking is required, the RX Clock Source and TX Clock Source should not be set to INTERNAL. Selecting CHAN 6 RXC allows Fallback clocks to originate from Sub-Channel 6 pin 17. The following table shows the available rates. If CHAN 6 RXC is selected, SW22-7 can be in either position.

SW22-4	SW22-5	SW22-6	Pos 7=ON	Pos 7=OFF
ON	ON	ON	76,800	57,600

OFF	ON	ON	38,400	28,800

ON	OFF	ON	19,200	14,400

OFF	OFF	ON	9,600	7,200

ON	ON	OFF	4,800	3,600

OFF	ON	OFF	2,400	1,800

ON	OFF	OFF	1,200	900

OFF	OFF	OFF	CHAN 6 RXC

SETUP & INSTALLATION

2-4

3060/V24 specifications

The Patton Electronic 3060/V24 is a cutting-edge digital communication solution that caters specifically to the need for versatile data transmission in various environments. This device is particularly well-suited for applications in enterprises, telecommunication networks, and industrial settings, delivering robust performance and reliability.

One of the standout features of the Patton Electronic 3060/V24 is its ability to support multiple protocols, making it highly adaptable to different communication standards. This flexibility ensures seamless integration into existing networks without the need for extensive changes or overhauls. Its support for synchronous and asynchronous data communication allows for efficient data transmission and enhances compatibility with legacy systems.

The device is equipped with advanced error correction technologies, ensuring the integrity and reliability of data during transmission over various mediums, including leased lines and IP networks. The use of sophisticated coding algorithms minimizes data loss and maximizes throughput, which is essential for businesses relying on critical communications.

In terms of characteristics, the Patton Electronic 3060/V24 boasts a user-friendly interface, simplifying configuration and management. With its intuitive web interface and SNMP support, network administrators can easily monitor performance metrics and troubleshoot issues in real-time. This ease of management helps reduce downtime and improves overall operational efficiency.

Moreover, the Patton Electronic 3060/V24 is designed with scalability in mind. It can easily expand to accommodate growing network demands, making it an ideal choice for organizations planning to future-proof their communication infrastructure. The device supports both copper and fiber connections, providing enhanced options for connectivity depending on the specific requirements of the deployment environment.

Power over Ethernet (PoE) capability further enhances its utility by allowing the device to receive power through the Ethernet cable, reducing the need for additional power outlets and simplifying installation in hard-to-reach areas.

In conclusion, the Patton Electronic 3060/V24 stands out as a versatile and reliable communication device that integrates advanced technologies to meet the demands of modern networks. Its flexibility, ease of management, and robust performance make it an ideal solution for businesses seeking to enhance their communication capabilities while ensuring reliability and efficiency.