| • The SmartNode contains no user serviceable parts. The equipment |
| shall be returned to Patton Electronics for repairs, or repaired by |
WARNING | qualified service personnel. |
• Mains Voltage: Do not open the case when the power cord is con- | |
| nected. For systems without a power switch, line voltages are |
| present within the power supply when the power cord is connected. |
| The mains outlet that is utilized to power the SmartNode router shall |
| be within 10 feet (3 meters) of the device, shall be easily accessible, |
| and protected by a circuit breaker |
| • The smartNode is not shipped with power cables. For AC powered |
| units, ensure that the power cable used meets all applicable stan- |
| dards for the country in which it is to be installed, and that it is con- |
| nected to a wall outlet which has earth ground. |
| • Hazardous network voltages are present in WAN ports regardless of |
| whether power to the SmartNode is ON or OFF. To avoid electric |
| shock, use caution when near WAN ports. when detaching the cables, |
| detach the end away from the SmartNode first. |
| • Do not work on the system or connect or disconnect cables during |
| periods of lightning activity. |
|
|
1.0 Power up the SmartNode
The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability.
CAUTION
1.Connect the SmartNode to a power source using the included power supply and cable.
2.When the Power LED stops blinking and remains lit, the SmartNode is ready to configure.
2.0 Set your PC to DHCP
The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability.
CAUTION
2 | SmartWare GUI Quick Start Guide |