Patton electronic 1400, 4552, 1200 quick start Get Started, Login window

Page 5

2.The subsequent pop-up window asks you for the login credentials (see figure 5). The factory default login credentials are:

User Name: administrator

Password: There is no password, leave this field empty

Figure 5. Login window

3.Click OK.

4.0 Get Started

After successful login you get to the SmartNode home page, and you can configure your device. You will be pre- sented the following home page, which contains buttons to store the current configuration state, reload the device and restore to factory defaults. The home page also shows some system information. You can always go back to the home page by clicking Home in the navigation bar.

SmartWare GUI Quick Start Guide

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VoIP Gateway Routers Set your PC to Dhcp Power up the SmartNodeSmartWare GUI Quick Start Guide Open the Configuration Interface Connect the PC to the SmartNode LAN PortGet Started Login windowImportant press the Save Current Configuration button Connecting a PC and logging Access the InternetAdditional Information Legal notice-Same as Document Number 13216U7-001 Rev. B Request for Support Customer and Technical SupportCompliance Information Appendix-Factory default IP addressesCompliance Radio and TV interferenceApproval EC Declaration of ConformityEG-Konformitätserklärung ZulassungCopyright statement SmartWare GUI Quick Start Guide SmartWare GUI Quick Start Guide SmartWare GUI Quick Start Guide
Top Page Image Contents