Patton electronic 4110 Series quick start C.0 Compliance Information

Page 9
C.0 Compliance Information

C.0 Compliance Information

C.1 Compliance

EMC Compliance:

FCC Part 15, Class A

EN55022, Class A

EN55024

Safety Compliance:

UL60950-1/CSA C22.2 No. 60950-1

IEC 60950-1

EN60950-1

AS/NZS 60950-1

PSTN Regulatory Compliance:

FCC Part 68

CS-03

TBR-21

AS/ACIF S002

AS/ACIF S003

C.2 Radio and TV interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television reception. The Smart- Node router have been tested and found to comply with the limits for a Class B computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection from such inter- ference in a commercial installation. However, there is no guarantee that interfer- ence will not occur in a particular installation. If the SmartNode router does cause interference to radio or television reception, which can be determined by discon- necting the unit, the user is encouraged to try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

SmartNode 4520 and 4110 Quick Start Guide

9

Image 9
Contents SmartNode 4520 and 4110 Series VoIP Gateway RoutersQuick Start Guide Document Number 13202U7-001 Rev. C1.0 Power up the SmartNode 2.0 Connect the SmartNode to your PC 5. Click OK to save changes and close the properties windows 3.0 Start the SmartNode Discovery Tool 4.0 Access the Command Line Interface 10.10.22.50if-ipeth0#copy tftp//10.10.1.11/SN.cfg startup- config configuration. Since you just downloaded a configuration filewritten and lost 6.0 Additional Information A.0 Factory default IP address informationB.0 Customer and Technical Support Fax +1 253 663-5693 USA or +41 031 985 25 26 SwitzerlandC.0 Compliance Information C.3 FCC Part 68 ACTA statement FXO ports R&TTE Directive 1999/5/EC R&TTE 1999/5/EGC.5 EC Declaration of Conformity Copyright statement WarrantyTrademarks statement C.8 Zulassung