TP-Link TL-WNB51N manual

Page 1

Note The product model shown in this QIG is TL-WN851N, as an example.

1.Power down your computer and unplug its power cord;

2.Open the case and locate an available PCI slot on the motherboard;

3.Insert the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts. You may have to apply a bit of pressure to slide the adapter all the way in. After the adapter is firmly in place, secure its fastening tab to your computer's chassis with a mounting screw;

4.Close the case and insert the power cable into the computer, then turn on the computer.

Image 1

Contents Page Choose Install Driver&Utility Installing Adapter DriverDriver Only Connecting to the Wireless Router by QSS Connecting to the Wireless Router/Access PointClick Refresh network list Click ConnectPage Installing Adapter Driver Page Wireless Router by QSS Save this network for automatically connecting Click Install QSS Installing the QSS DriverSelect Enter the PIN from my access point Connecting to the Wireless RouterPage Singapore GlobalAustralia & New Zealand USA/Canada