Connecting to the Wireless Router/Access Point

Connecting to the Wireless Router/Access Point

Note If the Wirless Router/Access Point supports Wi-Fi Protected Setup (WPS) function, you are recommanded to use the QSS (Quick Secure Setup) to quickly connect to your wireless network. Please refer to the Appendix

Connecting to the Wireless Router by QSS.

After you have successfuly installed the driver software, the icon will appear on the bottom right-hand corner of your desktop.

Click

Click Refresh network list

Select your network by the network name

Click Connect

Input the Network key of your wireless network

Click Connect

Note If you don’t know the wireless network key, please consult the network administrator or log on to the setup page of your Wireless Router/Access Point with an Ethernet cable to check the wireless security settings. Please refer to the manual of your Wireless Router/Access Point or contact the manufactory’s technical support for more details.