TP-Link To set time manually, TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide

Page 90

To set time manually:

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

Figure 4-77 Time settings

¾Time zone - Select your local time zone from this drop-down list.

¾Date - Enter your local date in MM/DD/YY into the right blanks.

¾Time - Enter your local time in HH/MM/SS into the right blanks.

¾NTP Server 1 / NTP Server 2 - Enter the address or domain of the NTP Server 1 or NTP Server 2, and then the Router will get the time from the NTP Server preferentially. In addition, the Router built-in some common NTP Servers, so it can get time automatically once it connects the Internet.

¾Enable Daylight Saving - Check the box to enable the Daylight Saving function.

¾Start - The time to start the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field.

¾End - The time to end the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field.

¾Daylight Saving Status - Displays the status whether the Daylight Saving is in use.

To set time manually:

1.Select your local time zone.

2.Enter the Date in Month/Day/Year format.

3.Enter the Time in Hour/Minute/Second format.

4.Click Save.

- 81 -

Image 90

Contents TL-WR841N TL-WR841ND 300Mbps Wireless N Router Rev 1910010635COPYRIGHT & TRADEMARKS FCC STATEMENTNational restrictions FCC RF Radiation Exposure StatementCE Mark Warning CountryIndustry Canada Statement Korea Warning StatementsNCC Notice Page Model No. TL-WR841N/TL-WR841ND Product Description 300Mbps Wireless N RouterDECLARATION OF CONFORMITY ETSI EN 300 328 V1.7.1Chapter 2. Connecting the Router CONTENTSPackage Contents Chapter 3. Quick Installation Guide4.7.2 Appendix C Specifications Appendix A FAQAppendix B Configuring the PC Appendix D GlossaryPackage Contents TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User GuideChapter 1. Introduction Flexible Access ControlSimple Installation 1.1 Overview of the RouterThe differences between them are 1.3 Main Features1.2 Conventions ¾ TL-WR841N Router with 2 fixed antennasName 1.4 Panel Layout1.4.1 The Front Panel Statusz Used as RESET button 1.4.2 The Rear Panelz Used as WPS button 2.3 Connecting the Router Chapter 2. Connecting the Router2.2 Installation Environment Requirements 2.1 System Requirements7. Power on your PC and Cable/DSL Modem Chapter 3. Quick Installation Guide 3.1 TCP/IP ConfigurationPlease check the connection following these steps 3.2 Quick Installation Guide Enter key300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841NDFigure 3-7 Quick Setup - PPPoE Figure 3-8 Quick Setup - MAC CloneFigure 3-9 Quick Setup - MAC Clone Figure 3-10 Quick Setup - Static IPFigure 3-11 Quick Setup - Wireless z PSK Password - You can enter ASCII or Hexadecimal characters 4.6 WirelessChapter 4. Configuring the Router 4.1 Login4.2 Status 4.4 WPS 4.3 Quick SetupPlease refer to 3.2 Quick Installation Guide Figure 4-1 Router StatusI. Use the Wi-Fi Protected Setup Button II. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client device4.5 Network 4.5.1 WANFigure 4-6 WAN - Dynamic IP TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-8 WAN - PPPoE to have elapsed before your Internet access disconnects TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide NSW / ACT - nsw.bigpond.net.au TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-12 PPTP Settings 4.5.2 MAC Clone z Dynamic IP - Connections which use dynamic IP address assignmentz Static IP - Connections which use static IP address assignment 4.5.3 LAN Only the PC on your LAN can use the MAC Address Clone function4.6 Wireless 4.6.1 Wireless SettingsFigure 4-16 Wireless Settings TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide 4.6.2 Wireless Security Figure 4-18 Wireless Security Encryption - You can select either Automatic, or TKIP or AES 4.6.3 Wireless MAC Filtering Figure 4-22 Wireless MAC FilteringTo modify or delete an existing entry 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics 4.7.1 DHCP Settings 4.7 DHCPThis page will be refreshed automatically every 5 seconds 4.7.2 DHCP Client List 4.7.3 Address Reservation To Reserve an IP address4.8 Forwarding 4.8.1 Virtual ServersTo set up a virtual server entry 4.8.2 Port Triggering To add a new rule, follow the steps below 4.8.3 DMZ 3. Incoming Ports cannot overlap each other4.8.4 UPnP To assign a computer or server to be a DMZ serverFigure 4-36 DMZ 4.9 Security 4.9.1 Basic Security4.9.2 Advanced Security Figure 4-40 Advanced Security 4.9.3 Local Management 4.9.4 Remote Management Figure 4-42 Remote Management4.10 Parental Control To add a new entry, please follow the steps below7. Click the Save button 4.11Access Control 4.11.1 RuleThere are two methods to add a new rule Method One If the MAC Address is selected, you can see the following item If the IP Address is selected, you will see the following items Method Two Figure 4-52 Add Internet Access Control Entry 4.11.2 Host Figure 4-53 Host Settings4.11.3 Target Figure 4-56 Target Settings Figure 4-57 Add or Modify an Access Target Entry Figure 4-58 Add or Modify an Access Target Entry4.11.4 Schedule To add a new schedule, follow the steps below4.12Advanced Routing Figure 4-60 Advanced Schedule SettingsFigure 4-61 Advanced Routing Menu 4.12.1 Static Routing To add static routing entries, follow the steps below4.13 Bandwidth Control 4.12.2 System Routing Table4.13.1 Control Settings 4.13.2 Rules List4.14 IP & MAC Binding Setting 4.14.1 Binding SettingsTo add/modify a Bandwidth Control rule, follow the steps below Figure 4-69 Binding Settings To add IP & MAC Binding entries, follow the steps belowTo modify or delete an existing entry, follow the steps below Figure 4-70 IP & MAC Binding Settings4.14.2 ARP List To find an existing entry, follow the steps below4.15 Dynamic DNS 4.15.1 Comexe.cn DDNS To set up for DDNS, follow these instructions 4.15.2 Dyndns.org DDNS4.15.3 No-ip.com DDNS Figure 4-74 Dyndns.org DDNS SettingsFigure 4-75 No-ip.com DDNS Settings 4.16.1 Time Settings 4.16 System ToolsTo set time manually To set Daylight Saving 4.16.2 DiagnosticTo set time automatically 2. The time will be lost if the router is turned offFigure 4-78 Diagnostic Tools 4.16.3 Firmware Upgrade To upgrade the Routers firmware, follow these instructions below4.16.4 Factory Defaults 4.16.5 Backup & Restore4 The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.7 Password 4.16.8 System LogFigure 4-86 Mail Account Settings 4.16.9 Statistics z z z z zStatistics Table SYN Tx ResetUDP Tx ModifyAppendix A FAQ 1. How do I configure the Router to access Internet by ADSL users?3. I want to use NetMeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic Security5. The wireless stations cannot connect to the Router Appendix B Configuring the PC 1. Configure TCP/IP componentFigure B-1 shown in the Figure below ¾ Setting IP address automaticallyNow you have two ways to configure the TCP/IP protocol below Figure B-2¾ Setting IP address manually Figure B-3Now click OK to keep your settings General Appendix C SpecificationsWireless Environmental and PhysicalAppendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection