TP-Link manual TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide, 78 Diagnostic Tools

Page 92

Figure 4-78 Diagnostic Tools

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

Figure 4-78 Diagnostic Tools

¾Diagnostic Tool - Check the radio button to select one diagnostic too.

z Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway.

z Traceroute - This diagnostic tool tests the performance of a connection.

) Note:

You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries.

¾IP Address/Domain Name - Type the destination IP address (such as 192.168.0.1) or Domain name (such as http://www.tp-link.com).

¾Pings Count - The number of Ping packets for a Ping connection.

¾Ping Packet Size - The size of Ping packet.

¾Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime.

¾Traceroute Max TTL - The max number of hops for a Traceroute connection.

Click Start to check the connectivity of the Internet.

The Diagnostic Results page displays the result of diagnosis.

- 83 -

Image 92

Contents TL-WR841N TL-WR841ND 300Mbps Wireless N Router Rev 1910010635COPYRIGHT & TRADEMARKS FCC STATEMENTFCC RF Radiation Exposure Statement CE Mark WarningNational restrictions CountryNCC Notice Industry Canada StatementKorea Warning Statements Page Product Description 300Mbps Wireless N Router DECLARATION OF CONFORMITYModel No. TL-WR841N/TL-WR841ND ETSI EN 300 328 V1.7.1CONTENTS Package ContentsChapter 2. Connecting the Router Chapter 3. Quick Installation Guide4.7.2 Appendix A FAQ Appendix B Configuring the PCAppendix C Specifications Appendix D GlossaryPackage Contents TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User GuideFlexible Access Control Simple InstallationChapter 1. Introduction 1.1 Overview of the Router1.3 Main Features 1.2 ConventionsThe differences between them are ¾ TL-WR841N Router with 2 fixed antennas1.4 Panel Layout 1.4.1 The Front PanelName Statusz Used as RESET button 1.4.2 The Rear Panelz Used as WPS button Chapter 2. Connecting the Router 2.2 Installation Environment Requirements2.3 Connecting the Router 2.1 System Requirements7. Power on your PC and Cable/DSL Modem Chapter 3. Quick Installation Guide 3.1 TCP/IP ConfigurationPlease check the connection following these steps 3.2 Quick Installation Guide Enter key300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841NDFigure 3-7 Quick Setup - PPPoE Figure 3-8 Quick Setup - MAC CloneFigure 3-9 Quick Setup - MAC Clone Figure 3-10 Quick Setup - Static IPFigure 3-11 Quick Setup - Wireless z PSK Password - You can enter ASCII or Hexadecimal characters 4.6 Wireless4.2 Status Chapter 4. Configuring the Router4.1 Login 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide4.4 WPS Figure 4-1 Router StatusI. Use the Wi-Fi Protected Setup Button II. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client device4.5 Network 4.5.1 WANFigure 4-6 WAN - Dynamic IP TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-8 WAN - PPPoE to have elapsed before your Internet access disconnects TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide NSW / ACT - nsw.bigpond.net.au TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-12 PPTP Settings z Static IP - Connections which use static IP address assignment 4.5.2 MAC Clonez Dynamic IP - Connections which use dynamic IP address assignment 4.5.3 LAN Only the PC on your LAN can use the MAC Address Clone function4.6 Wireless 4.6.1 Wireless SettingsFigure 4-16 Wireless Settings TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide 4.6.2 Wireless Security Figure 4-18 Wireless Security Encryption - You can select either Automatic, or TKIP or AES 4.6.3 Wireless MAC Filtering Figure 4-22 Wireless MAC FilteringTo modify or delete an existing entry 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics This page will be refreshed automatically every 5 seconds 4.7.1 DHCP Settings4.7 DHCP 4.7.2 DHCP Client List 4.7.3 Address Reservation To Reserve an IP address4.8 Forwarding 4.8.1 Virtual ServersTo set up a virtual server entry 4.8.2 Port Triggering To add a new rule, follow the steps below 4.8.3 DMZ 3. Incoming Ports cannot overlap each otherFigure 4-36 DMZ 4.8.4 UPnPTo assign a computer or server to be a DMZ server 4.9 Security 4.9.1 Basic Security4.9.2 Advanced Security Figure 4-40 Advanced Security 4.9.3 Local Management 4.9.4 Remote Management Figure 4-42 Remote Management4.10 Parental Control To add a new entry, please follow the steps below7. Click the Save button 4.11Access Control 4.11.1 RuleThere are two methods to add a new rule Method One If the MAC Address is selected, you can see the following item If the IP Address is selected, you will see the following items Method Two Figure 4-52 Add Internet Access Control Entry 4.11.2 Host Figure 4-53 Host Settings4.11.3 Target Figure 4-56 Target Settings Figure 4-57 Add or Modify an Access Target Entry Figure 4-58 Add or Modify an Access Target Entry4.11.4 Schedule To add a new schedule, follow the steps belowFigure 4-61 Advanced Routing Menu 4.12Advanced RoutingFigure 4-60 Advanced Schedule Settings 4.12.1 Static Routing To add static routing entries, follow the steps below4.13 Bandwidth Control 4.12.2 System Routing Table4.13.1 Control Settings 4.13.2 Rules ListTo add/modify a Bandwidth Control rule, follow the steps below 4.14 IP & MAC Binding Setting4.14.1 Binding Settings To add IP & MAC Binding entries, follow the steps below To modify or delete an existing entry, follow the steps belowFigure 4-69 Binding Settings Figure 4-70 IP & MAC Binding Settings4.14.2 ARP List To find an existing entry, follow the steps below4.15 Dynamic DNS 4.15.1 Comexe.cn DDNSTo set up for DDNS, follow these instructions 4.15.2 Dyndns.org DDNSFigure 4-75 No-ip.com DDNS Settings 4.15.3 No-ip.com DDNSFigure 4-74 Dyndns.org DDNS Settings 4.16.1 Time Settings 4.16 System ToolsTo set time manually 4.16.2 Diagnostic To set time automaticallyTo set Daylight Saving 2. The time will be lost if the router is turned offFigure 4-78 Diagnostic Tools 4.16.3 Firmware Upgrade To upgrade the Routers firmware, follow these instructions below4 The Router will reboot after the upgrading has been finished 4.16.4 Factory Defaults4.16.5 Backup & Restore 4.16.6 Reboot 4.16.7 Password 4.16.8 System LogFigure 4-86 Mail Account Settings 4.16.9 Statistics z z z z zStatistics Table Reset UDP TxSYN Tx ModifyAppendix A FAQ 1. How do I configure the Router to access Internet by ADSL users?3. I want to use NetMeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic Security5. The wireless stations cannot connect to the Router Figure B-1 Appendix B Configuring the PC1. Configure TCP/IP component ¾ Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below Figure B-2¾ Setting IP address manually Figure B-3Now click OK to keep your settings Appendix C Specifications WirelessGeneral Environmental and PhysicalAppendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection