TP-Link TL-WR841N manual Panel Layout, The Front Panel, Name, Status, Indication

Page 13

1.4 Panel Layout

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

1.4 Panel Layout

1.4.1 The Front Panel

Figure 1-1 Front Panel sketch

The Router’s LEDs are located on the front panel (View from left to right).

	Name	Status	Indication
	（Power）	Off	Power is off.
	（Power）	On	Power is on.
		On	Power is on.
	(System)	Flashing	The Router is working properly.
	(System)	On/Off	The Router has a system error.
		On/Off	The Router has a system error.
	(WLAN)	Off	The Wireless function is disabled.
	(WLAN)	Flashing	The Wireless function is enabled.
		Flashing	The Wireless function is enabled.
		Off	There is no device linked to the corresponding port.
	(WAN),	On	There is a device linked to the corresponding port but
	(LAN 1-4)	On	there is no activity.
	(LAN 1-4)		there is no activity.
		Flashing	There is an active device linked to the corresponding port.
		Slow Flash	A wireless device is connecting to the network by WPS
		Slow Flash	function. This process will last in the first 2 minutes.
			function. This process will last in the first 2 minutes.
	(WPS)	On	A wireless device has been successfully added to the
	(WPS)	On	network by WPS function.
			network by WPS function.
		Quick Flash	A wireless device failed to be added to the network by
		Quick Flash	WPS function.
			WPS function.
		Table 1-1 The LEDs Description

)Note:

After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.

- 4 -

Image 13

Contents Rev 1910010635 TL-WR841N TL-WR841ND 300Mbps Wireless N RouterFCC STATEMENT COPYRIGHT & TRADEMARKSCE Mark Warning FCC RF Radiation Exposure StatementNational restrictions CountryKorea Warning Statements Industry Canada StatementNCC Notice Page DECLARATION OF CONFORMITY Product Description 300Mbps Wireless N RouterModel No. TL-WR841N/TL-WR841ND ETSI EN 300 328 V1.7.1Package Contents CONTENTSChapter 2. Connecting the Router Chapter 3. Quick Installation Guide4.7.2 Appendix B Configuring the PC Appendix A FAQAppendix C Specifications Appendix D GlossaryTL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Package ContentsSimple Installation Flexible Access ControlChapter 1. Introduction 1.1 Overview of the Router1.2 Conventions 1.3 Main FeaturesThe differences between them are ¾ TL-WR841N Router with 2 fixed antennas1.4.1 The Front Panel 1.4 Panel LayoutName Status1.4.2 The Rear Panel z Used as RESET buttonz Used as WPS button 2.2 Installation Environment Requirements Chapter 2. Connecting the Router2.3 Connecting the Router 2.1 System Requirements7. Power on your PC and Cable/DSL Modem 3.1 TCP/IP Configuration Chapter 3. Quick Installation GuidePlease check the connection following these steps Enter key 3.2 Quick Installation GuideTL-WR841N/TL-WR841ND 300Mbps Wireless N Router User GuideFigure 3-8 Quick Setup - MAC Clone Figure 3-7 Quick Setup - PPPoEFigure 3-10 Quick Setup - Static IP Figure 3-9 Quick Setup - MAC CloneFigure 3-11 Quick Setup - Wireless 4.6 Wireless z PSK Password - You can enter ASCII or Hexadecimal characters4.1 Login Chapter 4. Configuring the Router4.2 Status Please refer to 3.2 Quick Installation Guide 4.3 Quick Setup4.4 WPS Figure 4-1 Router StatusI. Use the Wi-Fi Protected Setup Button III. Enter the Router’s PIN on your client device II. Enter the client device’s PIN on the Router4.5.1 WAN 4.5 NetworkFigure 4-6 WAN - Dynamic IP TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-8 WAN - PPPoE to have elapsed before your Internet access disconnects TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide NSW / ACT - nsw.bigpond.net.au TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-12 PPTP Settings z Dynamic IP - Connections which use dynamic IP address assignment 4.5.2 MAC Clonez Static IP - Connections which use static IP address assignment Only the PC on your LAN can use the MAC Address Clone function 4.5.3 LAN4.6.1 Wireless Settings 4.6 WirelessFigure 4-16 Wireless Settings TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide 4.6.2 Wireless Security Figure 4-18 Wireless Security Encryption - You can select either Automatic, or TKIP or AES Figure 4-22 Wireless MAC Filtering 4.6.3 Wireless MAC FilteringTo modify or delete an existing entry 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics 4.7 DHCP 4.7.1 DHCP SettingsThis page will be refreshed automatically every 5 seconds 4.7.2 DHCP Client List To Reserve an IP address 4.7.3 Address Reservation4.8.1 Virtual Servers 4.8 ForwardingTo set up a virtual server entry 4.8.2 Port Triggering To add a new rule, follow the steps below 3. Incoming Ports cannot overlap each other 4.8.3 DMZTo assign a computer or server to be a DMZ server 4.8.4 UPnPFigure 4-36 DMZ 4.9.1 Basic Security 4.9 Security4.9.2 Advanced Security Figure 4-40 Advanced Security 4.9.3 Local Management Figure 4-42 Remote Management 4.9.4 Remote ManagementTo add a new entry, please follow the steps below 4.10 Parental Control7. Click the Save button 4.11.1 Rule 4.11Access ControlThere are two methods to add a new rule Method One If the MAC Address is selected, you can see the following item If the IP Address is selected, you will see the following items Method Two Figure 4-52 Add Internet Access Control Entry Figure 4-53 Host Settings 4.11.2 Host4.11.3 Target Figure 4-56 Target Settings Figure 4-58 Add or Modify an Access Target Entry Figure 4-57 Add or Modify an Access Target EntryTo add a new schedule, follow the steps below 4.11.4 ScheduleFigure 4-60 Advanced Schedule Settings 4.12Advanced RoutingFigure 4-61 Advanced Routing Menu To add static routing entries, follow the steps below 4.12.1 Static Routing4.12.2 System Routing Table 4.13 Bandwidth Control4.13.2 Rules List 4.13.1 Control Settings4.14.1 Binding Settings 4.14 IP & MAC Binding SettingTo add/modify a Bandwidth Control rule, follow the steps below To modify or delete an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowFigure 4-69 Binding Settings Figure 4-70 IP & MAC Binding SettingsTo find an existing entry, follow the steps below 4.14.2 ARP List4.15.1 Comexe.cn DDNS 4.15 Dynamic DNS4.15.2 Dyndns.org DDNS To set up for DDNS, follow these instructionsFigure 4-74 Dyndns.org DDNS Settings 4.15.3 No-ip.com DDNSFigure 4-75 No-ip.com DDNS Settings 4.16 System Tools 4.16.1 Time SettingsTo set time manually To set time automatically 4.16.2 DiagnosticTo set Daylight Saving 2. The time will be lost if the router is turned offFigure 4-78 Diagnostic Tools To upgrade the Routers firmware, follow these instructions below 4.16.3 Firmware Upgrade4.16.5 Backup & Restore 4.16.4 Factory Defaults4 The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.8 System Log 4.16.7 PasswordFigure 4-86 Mail Account Settings z z z z z 4.16.9 StatisticsStatistics Table UDP Tx ResetSYN Tx Modify1. How do I configure the Router to access Internet by ADSL users? Appendix A FAQ3. I want to use NetMeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do?5. The wireless stations cannot connect to the Router 1. Configure TCP/IP component Appendix B Configuring the PCFigure B-1 Now you have two ways to configure the TCP/IP protocol below ¾ Setting IP address automaticallyshown in the Figure below Figure B-2Figure B-3 ¾ Setting IP address manuallyNow click OK to keep your settings Wireless Appendix C SpecificationsGeneral Environmental and PhysicalAppendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection