TP-Link TL-WR840N manual Panel Layout, Front Panel, Name Status Indication, Wps

Page 14

TL-WR840N300Mbps Wireless N Router User Guide

1.4 Panel Layout

1.4.1 The Front Panel

Figure 1-1 Front Panel sketch

The Router’s LEDs are located on the front panel (View from left to right).

Name

Status

Indication

（Power）

Off

Power is off.

On

Power is on.

 

(System)

Flashing

The Router is working properly.

On/Off

The Router has a system error.

 

 

Off

The Router isn’t connected to any wireless device.

(WLAN)

On

The Router is connected to some wireless device(s).

Flashing

Data is being transferred between the Router and the

 

 

wireless device(s) connected to it.

 

 

 

Off

There is no device linked to the corresponding port.

(WAN),

On

There is a device linked to the corresponding port but

(LAN 1-4)

there is no activity.

 

 

Flashing

There is an active device linked to the corresponding port.

 

Slow Flash

A wireless device is connecting to the network by WPS

 

function. This process will last in the first 2 minutes.

 

 

(WPS)

On

A wireless device has been successfully added to the

network by WPS function.

 

 

 

Quick Flash

A wireless device failed to be added to the network by

 

WPS function.

 

 

 

Table 1-1 The LEDs Description

)Note:

After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.

- 4 -

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TL-WR840N Copyright & Trademarks FCC Statement Korea Warning Statements Safety Information This product can be used in the following countries Product Description 300Mbps Wireless N Router Yang Hongliang Product Manager of International BusinessContents 11.1 Backup & Restore Package Contents Overview of the Router Flexible Access ControlSimple Installation Incredible SpeedMain Features ConventionsName Status Indication Panel LayoutFront Panel WPSUsed as WPS button Used as Reset buttonRear Panel System Requirements Installation Environment RequirementsConnecting the Router Hardware Installation Quick Installation Guide TCP/IP ConfigurationSuccess result of Ping command Please check the connection following these stepsQuick Installation Guide Enter keyQuick Setup Quick Setup L2TP/Russia L2TP Quick Setup PPTP/Russia Pptp 10 Quick Setup MAC Clone TL-WR840N PSK Password You can enter Ascii or Hexadecimal characters Wireless Login StatusQuick Setup WPSUse the Wi-Fi Protected Setup Button Add a New DeviceII. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client deviceNetwork 1 WANTL-WR840N300Mbps Wireless N Router User Guide WAN PPPoE PPPoE Advanced Settings TL-WR840N300Mbps Wireless N Router User Guide TL-WR840N300Mbps Wireless N Router User Guide 11 Pptp Settings MAC Clone 12 MAC Address Clone3 LAN 13 LANWireless Wireless SettingsTL-WR840N300Mbps Wireless N Router User Guide Wireless Security 17 Wireless Security Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 21 Wireless MAC Filtering22 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryWireless Advanced Wireless Statistics 24 Wireless StatisticsDhcp Settings DhcpDhcp Client List 27 Dhcp Clients ListAddress Reservation To Reserve an IP addressVirtual Servers To set up a virtual server entryForwarding Port Triggering 32 Add or Modify a Virtual Server EntryTo add a new rule, follow the steps below 3 DMZ 34 Add or Modify a Port Triggering EntryUPnP To assign a computer or server to be a DMZ serverSecurity Basic SecurityAdvanced Security TL-WR840N300Mbps Wireless N Router User Guide Local Management 40 Local ManagementRemote Management 41 Remote ManagementParental Control To add a new entry, please follow the steps below43 Add or Modify Parental Control Entry 11Access Control Rule46 Access Control Rule Management There are two methods to add a new rule Method One47 Quick Setup Create a Host Entry TL-WR840N300Mbps Wireless N Router User Guide Method Two 51 Add Internet Access Control Entry 52 Host Settings HostTarget 54 Add or Modify a Host Entry56 Add or Modify an Access Target Entry 57 Add or Modify an Access Target Entry Schedule59 Advanced Schedule Settings To add a new schedule, follow the steps belowTo add static routing entries, follow the steps below 12Advanced RoutingStatic Routing System Routing Table Rules List Control SettingsBandwidth Control 65 Bandwidth Control Rules List 14 IP & MAC Binding Setting Binding SettingsTo find an existing entry, follow the steps below ARP ListTo add IP & MAC Binding entries, follow the steps below Dynamic DNS Comexe.cn DdnsTo set up for DDNS, follow these instructions Dyndns.org DdnsTL-WR840N300Mbps Wireless N Router User Guide Time Settings System ToolsTo set Daylight Saving To set time manuallyTo set time automatically Diagnostic Firmware Upgrade 78 Diagnostic ResultsFactory Defaults Backup & RestoreReboot 81 Backup & Restore ConfigurationPassword System LogTL-WR840N300Mbps Wireless N Router User Guide Statistics 86 StatisticsStatistics Table UDP TxAppendix a FAQ Figure A-3 MAC Clone Want to use NetMeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the Router Figure A-9 Virtual ServersAppendix B Configuring the PC Configure TCP/IP component¾ Setting IP address manually Figure B-3Now click OK to keep your settings Environmental and Physical WirelessGeneral Appendix D Glossary TL-WR840N300Mbps Wireless N Router User Guide
Top Page Image Contents