TP-Link TL-WR840N manual Encryption You can select either Automatic, or Tkip or AES

TL-WR840N300Mbps Wireless N Router User Guide

•PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

¾WPA /WPA2 – Enterprise - It’s based on Radius Server.

•Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request.

•Encryption - You can select either Automatic, or TKIP or AES.

) Note:

If you check the WPA /WPA2 – Enterprise radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-19.

Figure 4-19

•Radius Server IP - Enter the IP address of the Radius server.

•Radius Port - Enter the port number of the Radius server.

•Radius Password - Enter the password for the Radius server.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

¾WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a notice in red as show in Figure 4-20.

Figure 4-20

•Type - you can choose the type for the WEP security on the drop-down list. The default setting is Automatic, which can select Shared Key or Open System authentication type automatically based on the wireless station's capability and request.

- 35 -