TP-Link TL-WR840N manual PSK Password You can enter Ascii or Hexadecimal characters

Page 26

TL-WR840N300Mbps Wireless N Router User Guide

¾Wireless Radio - The wireless radio can only be enabled/disabled by using the WIFI ON/OFF switch on the device.

¾Wireless Network Name - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.

¾Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

)Note:

Limited by local law regulations, version for North America does not have region selection option.

¾Mode - This field determines the wireless mode which the Router works on.

¾Channel Width - Select any channel width from the drop-down list. The default setting is automatic, which can adjust the channel width for your clients automatically.

¾Channel - This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security.

¾WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.

zPSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters.

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters.

Please also note the key is case sensitive, this means that upper and lower case keys will affect the outcome. It would also be a good idea to write down the key and all related wireless security settings.

¾No Change - If you chose this option, wireless security configuration will not change!

- 16 -

Page 25 Page 27
Image 26
Page 25 Page 27
Contents TL-WR840N Copyright & Trademarks FCC Statement Korea Warning Statements Safety Information This product can be used in the following countries Product Description 300Mbps Wireless N Router Yang Hongliang Product Manager of International BusinessContents 11.1 Backup & Restore Package Contents Overview of the Router Flexible Access ControlSimple Installation Incredible SpeedMain Features ConventionsName Status Indication Panel LayoutFront Panel WPSUsed as WPS button Used as Reset buttonRear Panel System Requirements Installation Environment RequirementsConnecting the Router Hardware Installation Quick Installation Guide TCP/IP ConfigurationSuccess result of Ping command Please check the connection following these stepsQuick Installation Guide Enter keyQuick Setup Quick Setup L2TP/Russia L2TP Quick Setup PPTP/Russia Pptp 10 Quick Setup MAC Clone TL-WR840N PSK Password You can enter Ascii or Hexadecimal characters Wireless Login StatusQuick Setup WPSUse the Wi-Fi Protected Setup Button Add a New DeviceII. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client deviceNetwork 1 WANTL-WR840N300Mbps Wireless N Router User Guide WAN PPPoE PPPoE Advanced Settings TL-WR840N300Mbps Wireless N Router User Guide TL-WR840N300Mbps Wireless N Router User Guide 11 Pptp Settings MAC Clone 12 MAC Address Clone3 LAN 13 LANWireless Wireless SettingsTL-WR840N300Mbps Wireless N Router User Guide Wireless Security 17 Wireless Security Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 21 Wireless MAC Filtering22 Add or Modify Wireless MAC Address Filtering entry To modify or delete an existing entryWireless Advanced Wireless Statistics 24 Wireless StatisticsDhcp Settings DhcpDhcp Client List 27 Dhcp Clients ListAddress Reservation To Reserve an IP addressVirtual Servers To set up a virtual server entryForwarding Port Triggering 32 Add or Modify a Virtual Server EntryTo add a new rule, follow the steps below 3 DMZ 34 Add or Modify a Port Triggering EntryUPnP To assign a computer or server to be a DMZ serverSecurity Basic SecurityAdvanced Security TL-WR840N300Mbps Wireless N Router User Guide Local Management 40 Local ManagementRemote Management 41 Remote ManagementParental Control To add a new entry, please follow the steps below43 Add or Modify Parental Control Entry 11Access Control Rule46 Access Control Rule Management There are two methods to add a new rule Method One47 Quick Setup Create a Host Entry TL-WR840N300Mbps Wireless N Router User Guide Method Two 51 Add Internet Access Control Entry 52 Host Settings HostTarget 54 Add or Modify a Host Entry56 Add or Modify an Access Target Entry 57 Add or Modify an Access Target Entry Schedule59 Advanced Schedule Settings To add a new schedule, follow the steps belowTo add static routing entries, follow the steps below 12Advanced RoutingStatic Routing System Routing Table Rules List Control SettingsBandwidth Control 65 Bandwidth Control Rules List 14 IP & MAC Binding Setting Binding SettingsTo find an existing entry, follow the steps below ARP ListTo add IP & MAC Binding entries, follow the steps below Dynamic DNS Comexe.cn DdnsTo set up for DDNS, follow these instructions Dyndns.org DdnsTL-WR840N300Mbps Wireless N Router User Guide Time Settings System ToolsTo set Daylight Saving To set time manuallyTo set time automatically Diagnostic Firmware Upgrade 78 Diagnostic ResultsFactory Defaults Backup & RestoreReboot 81 Backup & Restore ConfigurationPassword System LogTL-WR840N300Mbps Wireless N Router User Guide Statistics 86 StatisticsStatistics Table UDP TxAppendix a FAQ Figure A-3 MAC Clone Want to use NetMeeting, what do I need to do?Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Basic Security Want to build a WEB Server on the LAN, what should I do?Wireless stations cannot connect to the Router Figure A-9 Virtual ServersAppendix B Configuring the PC Configure TCP/IP component¾ Setting IP address manually Figure B-3Now click OK to keep your settings Environmental and Physical WirelessGeneral Appendix D Glossary TL-WR840N300Mbps Wireless N Router User Guide
Top Page Image Contents