1.4Panel Layout
1.4.1The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the Wireless On/Off button are located on the front panel (View from left to right).
| Name |
| Status |
| Indication |
| PWR |
| Off | Power is off. | |
|
| On |
| Power is on. | |
|
|
|
| ||
|
|
| On |
| The Router is initializing or maybe has a system error. |
| SYS |
| Flashing | The Router is working properly. | |
|
|
| Off | The Router has a system error. | |
| WIRELESS |
| Off | The Wireless function is disabled. | |
|
| Flashing | The Wireless function is enabled. | ||
|
|
| |||
|
|
| Off | There is no device linked to the corresponding port. | |
| LAN |
| On |
| There is a device linked to the corresponding port but there is no |
| INTERNET |
|
| activity. | |
|
|
|
| ||
|
|
| Flashing | There is an active device linked to the corresponding port. | |
| USB |
| Off | No storage device or printer is plugged into the USB port. | |
|
| On |
| A storage device or printer has connected to the USB port. | |
|
|
|
| ||
|
|
| Slow Flash |
| A wireless device is connecting to the network by WPS function. |
|
|
|
| This process will last in the first two minutes. | |
|
|
|
|
| |
| WPS |
| On |
| A wireless device has been successfully added to the network by |
|
|
| WPS function. | ||
|
|
|
|
| |
|
|
| Quick Flash |
| A wireless device failed to be added to the network by WPS |
|
|
|
| function. | |
|
|
|
|
| |
|
|
|
|
| Table |