TP-Link TL-WA750RE manual Factory Defaults, Backup & Restore

TL-WA750RE150Mbps Universal WiFi Range Extender User Guide

2.Enter the path name or click Browse… to select the downloaded file on the computer into the File blank.

3.Click Upgrade.

)Note:

Do not turn off the device or press the Reset button while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

4.6.2 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-22.

Figure 4-22 Restore Factory Defaults

Click Restore to reset all configuration settings to their default values.

1)Default User Name: admin

2)Default Password: admin

3)Default IP Address: 192.168.0.254

4)Default Subnet Mask: 255.255.255.0

)Note:

Any settings you have saved will be lost when the default settings are restored.

4.6.3 Backup & Restore

Selecting System Tools > Backup & Restore allows you to save all configuration settings to your local computer as a file or restore the device's configuration on the screen shown in Figure 4-23.

Figure 4-23 Save or Restore the Configuration

Click Backup to save all configuration settings to your local computer as a file.

To restore the device's configuration, follow these instructions:

1)Click Browse… to find the configuration file which you want to restore.

26