TP-Link TL-WA750RE manual Appendix B Troubleshooting, T2. What can I do if I forget my password?

Appendix B: Troubleshooting

T1. How do I restore my Range Extender’s configuration to its factory default settings?

There are TWO methods available to restore the factory defaults.

Method 1:

With the Range Extender TL-WA750RE powered on, use a pin to press and hold the RESET button on the rear panel for more than 8 seconds before releasing it.

Method 2:

Get logged in to the web-based management page of TL-WA750RE, then go to “System Tools -> Factory Defaults” and click “Restore”.

)Note:

Once the Range Extender is reset, the current configuration settings will be lost and you will need to reconfigure it.

T2. What can I do if I forget my password?

1)Restore the Range Extender’s configuration to its factory default settings. If you don’t know how to do that, please refer to previous T1;

2)Use the default user name and password: admin, admin;

3)Try to reconfigure your Range Extender by following the instructions of this UG.

T3. What can I do if I cannot access the web-based configuration page?

1)Check to verify all the connections (either wireless or wired ones) are proper. If yes, please proceed to the next step; otherwise, check the connections again.

31