TP-Link TL-WA730RE manual DHCP Clients List, Address Reservation

Page 44

4.8.2 DHCP Clients List

TL-WA730RE

150Mbps Wireless N Range Extender User Guide

¾Primary DNS (optional) - Enter the DNS IP address provided by your ISP. Consult your ISP if you don’t know the DNS value. The factory default setting is 0.0.0.0.

¾Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP provides two DNS servers. The factory default setting is 0.0.0.0.

Click Save to save the changes.

)Note:

1.When the device is working on Dynamic IP mode, the DHCP Server function will be disabled.

2.To use the DHCP server function of the device, you should configure all computers in the LAN as "Obtain an IP Address automatically" mode. This function will not take effect until the device reboots.

4.8.2 DHCP Clients List

Selecting DHCP > DHCP Clients List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-23).

Figure 4-23 DHCP Clients List

¾ID - Here displays the index of the DHCP client.

¾Client Name - Here displays the name of the DHCP client.

¾MAC Address - Here displays the MAC address of the DHCP client.

¾Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client.

¾Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

4.8.3 Address Reservation

Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a PC on the LAN, so the PC will always obtain the same IP address each time when it accesses the AP. Reserved IP addresses should be assigned to servers that require permanent IP settings. The screen below is used for address reservation (shown in Figure 4-24).

36

Image 44

Contents TL-WA730RE 150Mbps Wireless N Range Extender Rev 2.0.0COPYRIGHT & TRADEMARKS All rights reservedCE Mark Warning FCC STATEMENTFCC RF Radiation Exposure Statement Safety Information Canadian Compliance StatementIndustry Canada Statement Korea Warning StatementsThis product can be used in the following countries DECLARATION OF CONFORMITY Product Description 150Mbps Wireless N Range ExtenderThe product carries the CE Mark ETSI EN 300 328 V1.7.1CONTENTS Package ContentsHardware Installation Chapter 3 Quick Installation GuideAppendix B Factory Defaults Appendix C TroubleshootingAppendix D Specifications Appendix A Application ExamplePackage Contents TL-WA730REChapter 1 Introduction 1.1 Product Overview1.2 Conventions TL-WA730RE 150Mbps Wireless N Range Extender User Guide1.3 Main Features Features1.4 Appearance Benefits1.4.2 The Rear Panel Ensure the Range Extender is powered on before it restarts completely Chapter 2 Hardware Installation 2.3 Connecting the Device2.1 Before You Begin 2.2 Basic Requirements1. Connect the Cable or DSL modem to a Router Chapter 3 Quick Installation Guide 3.1 Quick SetupFigure 3-2 Login Windows Figure 3-4 Operation Mode Figure 3-6 AP List Figure 3-7 Wireless Settings - Access Point mode Figure 3-9 Quick Setup - Finish Figure 3-11 Quick Setup - Finish Chapter 4 Configure the Device 4.1 Login4.2 Status 4.5 WPS 4.3 Quick Setup4.4 Operation Mode Method One To add a new deviceI. By PBC TL-WA730RE 150Mbps Wireless N Range Extender User Guide TL-WA730RE 150Mbps Wireless N Range Extender User Guide TL-WA730RE 150Mbps Wireless N Range Extender User Guide 4.7 Wireless 4.6 Network4.7.1 Wireless Settings ¾ Region - Please select the right region from the drop-down list 4.7.2 Wireless Security 1 Repeater Range Extender 3 WPA2-Personal - WPA versionWEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digits 0-9, a-f, A-F in the specified length 2 Access Point 4.7.3 Wireless MAC Filtering To set up an entry, follow these instructions To add a MAC Address Filtering entry, follow these instructionsTo modify or delete an existing entry 4.7.4 Wireless Advanced 150Mbps Wireless N Range Extender User Guide4.7.5 Antenna Alignment 4.7.6 Throughput Monitor4.7.7 Wireless Statistics 4.8 DHCP4.8.1 DHCP Settings 4.8.2 DHCP Clients List 4.8.3 Address Reservation4.9 System Tools To Reserve IP addressesTo modify A Reserved IP address To delete all Reserved IP addresses 1. Click Clear All4.9.1 SNMP 4.9.2 Time Settings ¾ For automatic time synchronization 4.9.3 Diagnostic¾ To set time manually Figure 4-28 Diagnostic 4.9.4 Ping Watch Dog 4.9.5 Firmware Upgrade To upgrade the devices firmware, follow these instructions 4.9.6 Factory Defaults4.9.7 Backup & Restore 4.9.8 Reboot To restore the devices configuration, follow these instructions4.9.9 Password 4.9.10 System LogFigure 4-36 System Log 4.9.11 Statistics ¾ Statistics Table ¾ Total¾ Current ¾ ModifyAppendix A Application Example 3 Right-click the wireless connection icon “” on the screen of the PC and then select View Available Wireless Networks TL-WA730RE 150Mbps Wireless N Range Extender User Guide Appendix B Factory Defaults Default ValueCommon Default Settings WirelessAppendix C Troubleshooting T2. What can I do if I forget my password?2 Click Change adapter settings 3 Right-click Local Area Connection, and Click Properties4 Double-click Internet Protocol Version 4 TCP/IPv4 TL-WA730RE 150Mbps Wireless N Range Extender User Guide Physical and Environment Appendix D SpecificationsGeneral Appendix E Glossary TL-WA730RE 150Mbps Wireless N Range Extender User Guide

Related manuals

Manual 64 pages 33.88 Kb