Polycom 3804-11530-222 manual Configuration File Parameter Changes

Page 29

Release Notes - SIP Application

Changes

19124: Setting codec preferences using web interface does not work correctly for SoundPoint IP 650

19252: Phone does not send a final NOTIFY to initiator of transfer if the phone cancels the transfer before it completes

19292: SoundPoint IP 650 phone may freeze after restarting after configuration changed using one of the menus

19427: Phone can display “Cache bounced” error message when submitting forms from the microbrowser

19524: Problems resuming a call which is on hold on a remote bridged line for a specific SIP server

19605: Phone may continue to send INVITE’s in specific scenario if a call is initiated then ended but the SIP servers are not reachable

19664: Phone may reboot in some scenarios with log file showing a Null pointer in a specific task

19702: Receipt of a re-transmitted invalid SIP ACK message may cause phone to reboot

19754: Do Not Disturb key cannot be remapped to Null

19827: Phone using Bridged Line Appearance can send corrupt message header in SUBSCRIBE message

19875: Phone should use NTP time to check validity of SSL server certificate

19876: Phone will lose some memory if microbrowser displays “Cache bounced” error message due to unresponsive server

19883: Handset sidetone level is 3dB too hot on SoundPoint IP 430

35063: Power levels reported via CDP for SoundPoint IP 650 are too low

35068: Power levels reported via CDP for SoundPoint IP 601 with EM Power option enabled are too high

2.7.4 Configuration File Parameter Changes

.cfg

Action

Parameter

Description

File

 

 

 

phone1

added

reg.x.server.y.lcs

Refer to Technical Bulletin 5844.

phone1

added

dialplan.x.applyToUserSend="1"

Refer to Technical Bulletin 11572.

 

 

dialplan.x.applyToUserDial="1"

 

 

 

dialplan.x.applyToCallListDial="0"

 

 

 

dialplan.x.applyToDirectoryDial="0"

 

phone1

added

reg.x.server.y.transport and

Added “TCPOnly” as a possible value for

 

 

reg.x.outboundProxy.transport

these existing parameters.

phone1

changed

msg.mwi.x.callBackMode="disabled" to

 

 

 

msg.mwi.x.callBackMode="registration"

 

 

 

(for x = 2, 3, 4, 5, 6) [changed for bug

 

 

 

13818]

 

sip

added

voIpProt.server.1.lcs

Refer to Technical Bulletin 5844.

Copyright © 2007 Polycom, Inc.

Page 23

Image 29
Contents Version SoundPoint and SoundStation IPPage Table of Contents Copyright 2007 Polycom, Inc 18.3 Reference Documents System Requirements Platform BootROM versionImportant Notes Files Description Distribution FilesRemoved Features Added or Changed FeaturesRemove 1000 half duplex as a valid ethernet configuration VersionCfg File Action Parameter Description Configuration File Parameter ChangesVersion 2.2.1 Limited Release Cfg File Action Parameter Dhcpinform Removed support for the SoundPoint IP 300 and 500 phones Release Notes SIP Application Changes Release Notes SIP Application Changes Dhcp Cfg File Action Parameter Description Cfg File Action Parameter Description Cfg File Action Parameter Description Added logging of version information for configuration files RFC Version 2.1.1 C Following issues have been resolved with this release Release Notes SIP Application Changes Cfg Action Parameter Description File Version Removed Features Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.3 B Following issues have been resolved with this release None Configuration File Parameter Changes Version Malformed Rtcp packets can crash Cisco gateways Version 2.0.1 BEmergency routing is not supported on shared lines Call.callWaiting.prompt has no effect Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.0 Beta Release Only Release Notes SIP Application Changes Removed Features Release Notes SIP Application Changes Release Notes SIP Application Changes Configuration File Parameter Changes Cfg Action Parameter Description File Cfg Action Parameter Description File Version Configuration File Parameter Changes Add Support for SoundPoint IP 430 hardware platform Version 1.6.6 C Limited DistributionVersion 1.6.6 B Version Following issues have been resolved with this release Changed power reported via CDP to platform-specific values Removed Features Version Version Disabled url-dialing in main partner configuration files Contactsdirectory Cfg Action Parameter File Version 1.6.0 Beta onlyRemoved Features Configuration File Parameter Changes From Version 2.2.1 to UpgradingFrom Version 2.2.0 to From Version 2.1.2 toFrom Version 2.1.0 to From Version 2.1.1 C toFrom Version 2.1.1 to 2.1.1 C From Version 2.0.2 to From Version 2.0.3 toFrom Version 2.0.3 to 2.0.3 B From Version 1.6.7 to From Version 2.0.1 toFrom Version 2.0.0 to From Version 1.6.4 to From Version 1.6.6 toFrom Version 1.6.5 to From Version 1.6.2 to From Version 1.6.3 toFrom Version 1.6.1 to From Version 1.6.0 toNo Layer 2 QoS support for signaling protocol TCP Outstanding IssuesHttp Digest Authentication does not work on IIS Boot servers running explicit Ftps are not supportedBLA line can not place and hold more than 10 calls Active FTP mode is not supported for phone provisioningBrief audio ‘noise’ due to Srtp encryption key change Reference Documents

3804-11530-222 specifications

The Polycom 3804-11530-222 is a highly regarded communication device that exemplifies the power of modern telephony and video conferencing solutions. As part of Polycom's extensive lineup, this model is designed to enhance collaboration and productivity in various business environments.

One of the standout features of the Polycom 3804-11530-222 is its superior audio quality. The device utilizes Polycom's legendary Acoustic Clarity Technology, which ensures that every word is heard clearly, reducing background noise and echo. This is particularly crucial in conference room settings where multiple participants are involved. The technology allows for natural conversation flow, enabling users to communicate effectively without interruptions.

Another significant characteristic of the Polycom 3804-11530-222 is its robust design tailored for conference environments. The device is built to support up to six participants, making it ideal for small to medium-sized meeting rooms. Its user-friendly interface includes intuitive buttons that allow seamless operation without the need for extensive training.

The devices equipped with Polycom's HD Voice technology deliver crystal-clear audio at a full range of frequencies. This high-definition audio capability ensures that even the most nuanced tones are transmitted accurately, providing an immersive audio experience for users. Whether it's a boardroom meeting or a project discussion, the Polycom 3804-11530-222 guarantees that participants feel engaged and connected.

Additionally, the Polycom 3804-11530-222 is designed to integrate seamlessly with major unified communication platforms, including Microsoft Teams, Zoom, and Skype for Business. This compatibility makes the device a versatile addition to any corporate telecommunications setup, allowing users to transition smoothly between different communication methods.

Furthermore, the device supports multiple connectivity options, including USB and Ethernet ports. This flexibility ensures easy integration into existing infrastructures, and enables users to connect laptops and other devices quickly for presentations or video conferencing.

In summary, the Polycom 3804-11530-222 is not just a phone; it is a comprehensive communication solution that enhances collaboration and improves productivity in any professional setting. With its focus on audio clarity, user-friendly design, seamless integration, and versatile connectivity options, it continues to be a preferred choice for organizations looking to elevate their communication capabilities.