Polycom 3804-11530-222 manual From Version 1.6.6 to, From Version 1.6.5 to, From Version 1.6.4 to

Page 64

Release Notes - SIP Application

Notes

The rules are:

1) When qos.ip.rtp.dscp has a valid value, then it overrides the following:

i)qos.ip.rtp.min_delay

ii)qos.ip.rtp.max_throughput

iii)qos.ip.rtp.max_reliability

iv)qos.ip.rtp.min_cost

v)qos.ip.rtp.precedence

2)Similarly when qos.ip.callControl.dscp has a valid value, then it overrides qos.ip.callControl.min_delay etc.

3.1.13From Version 1.6.6 to 1.6.7

3.1.13.1 Mandatory Changes

Selecting “sticky” line seize behavior

To have the same line seize behavior as SIP 1.6.5, set call.stickyAutoLineSeize to 1 in sip.cfg.

3.1.13.2 Optional Changes

Overriding codec preferences received from far end

To allow the phone to override the list of codec preferences received by the phone, set voIpProt.SDP.answer.useLocalPreferences to 1 in sip.cfg.

3.1.14 From Version 1.6.5 to 1.6.6

3.1.14.1Mandatory Changes

None.

3.1.14.2Optional Changes

Sending re-INVITE to server during conference setup on BLA Set call.shared.exposeAutoHolds to 1 in sip.cfg

3.1.15 From Version 1.6.4 to 1.6.5

3.1.15.1Mandatory Changes

• None.

3.1.15.2Optional Changes

Getting SIP server address from DHCP

The SIP server address can be obtained from a DHCP server if the new parameters voIpProt.server.dhcp.available, voIpProt.server.dhcp.option and voIpProt.server.dhcp.type are configured correctly.

Using configuration file values for SNTP parameters instead of DHCP values

If the configuration file settings for the SNTP server address or GMT offset should be used instead of the values obtained from a DHCP server, set one or both of the new parameters tcpIpApp.sntp.address.overrideDHCP and tcpIpApp.sntp.gmtOffset.overrideDHCP to 1.

Page 58

Copyright © 2007 Polycom, Inc.

Image 64
Contents SoundPoint and SoundStation IP VersionPage Table of Contents Copyright 2007 Polycom, Inc 18.3 Reference Documents Important Notes Platform BootROM versionSystem Requirements Distribution Files Files DescriptionAdded or Changed Features Removed FeaturesRemove 1000 half duplex as a valid ethernet configuration VersionVersion 2.2.1 Limited Release Configuration File Parameter ChangesCfg File Action Parameter Description Cfg File Action Parameter Dhcpinform Removed support for the SoundPoint IP 300 and 500 phones Release Notes SIP Application Changes Release Notes SIP Application Changes Dhcp Cfg File Action Parameter Description Cfg File Action Parameter Description Cfg File Action Parameter Description Added logging of version information for configuration files RFC Version 2.1.1 C Following issues have been resolved with this release Release Notes SIP Application Changes Cfg Action Parameter Description File Version Removed Features Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.3 B Following issues have been resolved with this release None Configuration File Parameter Changes Version Emergency routing is not supported on shared lines Version 2.0.1 BMalformed Rtcp packets can crash Cisco gateways Call.callWaiting.prompt has no effect Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.0 Beta Release Only Release Notes SIP Application Changes Removed Features Release Notes SIP Application Changes Release Notes SIP Application Changes Configuration File Parameter Changes Cfg Action Parameter Description File Cfg Action Parameter Description File Version Configuration File Parameter Changes Version 1.6.6 B Version 1.6.6 C Limited DistributionAdd Support for SoundPoint IP 430 hardware platform Version Following issues have been resolved with this release Changed power reported via CDP to platform-specific values Removed Features Version Version Disabled url-dialing in main partner configuration files Contactsdirectory Version 1.6.0 Beta only Cfg Action Parameter FileRemoved Features Configuration File Parameter Changes Upgrading From Version 2.2.1 toFrom Version 2.2.0 to From Version 2.1.2 toFrom Version 2.1.1 to 2.1.1 C From Version 2.1.1 C toFrom Version 2.1.0 to From Version 2.0.3 to 2.0.3 B From Version 2.0.3 toFrom Version 2.0.2 to From Version 2.0.0 to From Version 2.0.1 toFrom Version 1.6.7 to From Version 1.6.5 to From Version 1.6.6 toFrom Version 1.6.4 to From Version 1.6.3 to From Version 1.6.2 toFrom Version 1.6.1 to From Version 1.6.0 toOutstanding Issues No Layer 2 QoS support for signaling protocol TCPHttp Digest Authentication does not work on IIS Boot servers running explicit Ftps are not supportedActive FTP mode is not supported for phone provisioning BLA line can not place and hold more than 10 callsReference Documents Brief audio ‘noise’ due to Srtp encryption key change

3804-11530-222 specifications

The Polycom 3804-11530-222 is a highly regarded communication device that exemplifies the power of modern telephony and video conferencing solutions. As part of Polycom's extensive lineup, this model is designed to enhance collaboration and productivity in various business environments.

One of the standout features of the Polycom 3804-11530-222 is its superior audio quality. The device utilizes Polycom's legendary Acoustic Clarity Technology, which ensures that every word is heard clearly, reducing background noise and echo. This is particularly crucial in conference room settings where multiple participants are involved. The technology allows for natural conversation flow, enabling users to communicate effectively without interruptions.

Another significant characteristic of the Polycom 3804-11530-222 is its robust design tailored for conference environments. The device is built to support up to six participants, making it ideal for small to medium-sized meeting rooms. Its user-friendly interface includes intuitive buttons that allow seamless operation without the need for extensive training.

The devices equipped with Polycom's HD Voice technology deliver crystal-clear audio at a full range of frequencies. This high-definition audio capability ensures that even the most nuanced tones are transmitted accurately, providing an immersive audio experience for users. Whether it's a boardroom meeting or a project discussion, the Polycom 3804-11530-222 guarantees that participants feel engaged and connected.

Additionally, the Polycom 3804-11530-222 is designed to integrate seamlessly with major unified communication platforms, including Microsoft Teams, Zoom, and Skype for Business. This compatibility makes the device a versatile addition to any corporate telecommunications setup, allowing users to transition smoothly between different communication methods.

Furthermore, the device supports multiple connectivity options, including USB and Ethernet ports. This flexibility ensures easy integration into existing infrastructures, and enables users to connect laptops and other devices quickly for presentations or video conferencing.

In summary, the Polycom 3804-11530-222 is not just a phone; it is a comprehensive communication solution that enhances collaboration and improves productivity in any professional setting. With its focus on audio clarity, user-friendly design, seamless integration, and versatile connectivity options, it continues to be a preferred choice for organizations looking to elevate their communication capabilities.