Polycom 3804-11530-222 manual From Version 2.0.3 to 2.0.3 B, From Version 2.0.2 to

Page 62

Release Notes - SIP Application

Notes

line will be added to SDP. See details in 2.6.4 Configuration File Parameter

 

Changes.

 

3.1.7 From Version 2.0.3 to 2.1.0

3.1.7.1 Mandatory Changes

Using a Microsoft LCS Server

It may be required to set the new parameters voIpProt.server.x.lcs (in sip.cfg) and reg.x.server.y.lcs (in phone1.cfg) if the phone registers to a Microsoft LCS server.

3.1.7.2 Optional Changes

Using “inactive” stream mode attribute when a call is put on hold

The default behavior is for the “sendonly” stream mode attribute to be used when a call is put on hold. This behavior can be changed to use the “inactive” attribute. In order to configure this behavior, the parameter voIpProt.SIP.useSendonlyHold must be set to 0.

Digit map extension support

The digit map can be configured to remove, add or replace digits. For details see Technical Bulletin 11572.

Restricting transport to TCP

The transport used by the phone can be restricted to TCP. This means the phone will not attempt to fail over to UDP if TCP fails. A new “TCPOnly” option has been added to all parameters which control the transport used by the phone.

Adding “sticky line seize” behavior for hot-dial (on-hook) dialing

If sticky behavior is desired for hot dialing this can be configured using the new call.sticky.AutoLineSeize.onHookDialing parameter. Hot dialing sticky behavior can be configured to be different than normal new call sticky behavior. “Stickiness” refers to using the same line for a new call as the last-used line when a call has been put on hold.

3.1.8 From Version 2.0.3 to 2.0.3 B

3.1.8.1Mandatory Changes

None.

3.1.8.2Optional Changes

None.

3.1.9 From Version 2.0.2 to 2.0.3

3.1.9.1Mandatory Changes

None.

3.1.9.2Optional Changes

None.

Page 56

Copyright © 2007 Polycom, Inc.

Image 62
Contents SoundPoint and SoundStation IP VersionPage Table of Contents Copyright 2007 Polycom, Inc 18.3 Reference Documents System Requirements Platform BootROM versionImportant Notes Distribution Files Files DescriptionRemove 1000 half duplex as a valid ethernet configuration Added or Changed FeaturesRemoved Features VersionCfg File Action Parameter Description Configuration File Parameter ChangesVersion 2.2.1 Limited Release Cfg File Action Parameter Dhcpinform Removed support for the SoundPoint IP 300 and 500 phones Release Notes SIP Application Changes Release Notes SIP Application Changes Dhcp Cfg File Action Parameter Description Cfg File Action Parameter Description Cfg File Action Parameter Description Added logging of version information for configuration files RFC Version 2.1.1 C Following issues have been resolved with this release Release Notes SIP Application Changes Cfg Action Parameter Description File Version Removed Features Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.3 B Following issues have been resolved with this release None Configuration File Parameter Changes Version Malformed Rtcp packets can crash Cisco gateways Version 2.0.1 BEmergency routing is not supported on shared lines Call.callWaiting.prompt has no effect Release Notes SIP Application Changes Configuration File Parameter Changes Version 2.0.0 Beta Release Only Release Notes SIP Application Changes Removed Features Release Notes SIP Application Changes Release Notes SIP Application Changes Configuration File Parameter Changes Cfg Action Parameter Description File Cfg Action Parameter Description File Version Configuration File Parameter Changes Add Support for SoundPoint IP 430 hardware platform Version 1.6.6 C Limited DistributionVersion 1.6.6 B Version Following issues have been resolved with this release Changed power reported via CDP to platform-specific values Removed Features Version Version Disabled url-dialing in main partner configuration files Contactsdirectory Version 1.6.0 Beta only Cfg Action Parameter FileRemoved Features Configuration File Parameter Changes From Version 2.2.0 to UpgradingFrom Version 2.2.1 to From Version 2.1.2 toFrom Version 2.1.0 to From Version 2.1.1 C toFrom Version 2.1.1 to 2.1.1 C From Version 2.0.2 to From Version 2.0.3 toFrom Version 2.0.3 to 2.0.3 B From Version 1.6.7 to From Version 2.0.1 toFrom Version 2.0.0 to From Version 1.6.4 to From Version 1.6.6 toFrom Version 1.6.5 to From Version 1.6.1 to From Version 1.6.3 toFrom Version 1.6.2 to From Version 1.6.0 toHttp Digest Authentication does not work on IIS Outstanding IssuesNo Layer 2 QoS support for signaling protocol TCP Boot servers running explicit Ftps are not supportedActive FTP mode is not supported for phone provisioning BLA line can not place and hold more than 10 callsReference Documents Brief audio ‘noise’ due to Srtp encryption key change

3804-11530-222 specifications

The Polycom 3804-11530-222 is a highly regarded communication device that exemplifies the power of modern telephony and video conferencing solutions. As part of Polycom's extensive lineup, this model is designed to enhance collaboration and productivity in various business environments.

One of the standout features of the Polycom 3804-11530-222 is its superior audio quality. The device utilizes Polycom's legendary Acoustic Clarity Technology, which ensures that every word is heard clearly, reducing background noise and echo. This is particularly crucial in conference room settings where multiple participants are involved. The technology allows for natural conversation flow, enabling users to communicate effectively without interruptions.

Another significant characteristic of the Polycom 3804-11530-222 is its robust design tailored for conference environments. The device is built to support up to six participants, making it ideal for small to medium-sized meeting rooms. Its user-friendly interface includes intuitive buttons that allow seamless operation without the need for extensive training.

The devices equipped with Polycom's HD Voice technology deliver crystal-clear audio at a full range of frequencies. This high-definition audio capability ensures that even the most nuanced tones are transmitted accurately, providing an immersive audio experience for users. Whether it's a boardroom meeting or a project discussion, the Polycom 3804-11530-222 guarantees that participants feel engaged and connected.

Additionally, the Polycom 3804-11530-222 is designed to integrate seamlessly with major unified communication platforms, including Microsoft Teams, Zoom, and Skype for Business. This compatibility makes the device a versatile addition to any corporate telecommunications setup, allowing users to transition smoothly between different communication methods.

Furthermore, the device supports multiple connectivity options, including USB and Ethernet ports. This flexibility ensures easy integration into existing infrastructures, and enables users to connect laptops and other devices quickly for presentations or video conferencing.

In summary, the Polycom 3804-11530-222 is not just a phone; it is a comprehensive communication solution that enhances collaboration and improves productivity in any professional setting. With its focus on audio clarity, user-friendly design, seamless integration, and versatile connectivity options, it continues to be a preferred choice for organizations looking to elevate their communication capabilities.