Polycom RMX 1000 V1.1.1, SE 200 V3.0.2/CMA manual View Device status

Page 9

Polycom RMX 1000 V1.1.1and SE 200 V3.0.2/CMA V4.0 Integration User Guide

RMX1000.

See the following drawing:

6Click Add, Add New Device command will submit, and if no error message pop-up, means the RMX 1000 device is added successfully.

View Device status

1Click Admin/Monitor View, select Filter to Type, and select another drop-down box behind Filter to RMX, device named RMX1000 lists in the device list.

2View Status of RMX1000 in the list.

See the following drawing:

2-3

Image 9

Contents Page Catalog No Version Table of Contents Page Introduction Page Add Device Manage DeviceManage Device View Device status Delete Device Edit Device detailCreate a template Schedule conferenceCreate a conference Set MCU Settings Set Supported MCUs RMX to SelectedClick Schedule Page Manage conference Extend Conference Change LayoutAdd participant Manage participantManage conference Connect/Disconnect Participant Remove Participant Mute/unmute Participant Manage conference Terminate conference