Polycom SE 200 V3.0.2/CMA, RMX 1000 V1.1.1 manual Create a conference

Page 12

Chapter 3- Schedule conference

c.Set MCU Settings page:

Set Supported MCUs RMX to SELECTED;

Set RMX Profile Name to a profile which exists in the profile list of the RMX 1000 device. See the following drawing:

Create a conference

1Click Conference Add Conference, See the following drawing:

2Add Conference page will display, and set following information: Set Conference Name to a valid value; here we set to admin – testconf. Set Start Time;

Set Duration or End Time;

User can set Recurrence for schedule a recurrent conference;

Add at least two video resources or participants in a video conference.

Three methods to add resources or participants into conference: Search

For Rooms at Site; use Add Participants; use Add Guest;

Select a valid template; here we select template named rmx1000_hml which has same profile in RMX1000 device.

3-2

Image 12
Contents Page Catalog No Version Table of Contents Page Introduction Page Manage Device Add DeviceManage Device View Device status Edit Device detail Delete DeviceSchedule conference Create a templateSet MCU Settings Set Supported MCUs RMX to Selected Create a conferenceClick Schedule Page Manage conference Change Layout Extend ConferenceManage participant Add participantManage conference Connect/Disconnect Participant Remove Participant Mute/unmute Participant Manage conference Terminate conference