SpectraLink Corporation | NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide |
Navigation
Up/Down buttons: display previous/next menu item.
Select button: selects the menu item or option.
OK softkey: selects the menu item or option.
Save softkey: saves the entry.
Bksp softkey: backspaces to allow editing of entry.
Cncl softkey: cancels edit and returns to previous menu level.
Up softkey: returns to previous menu level.
Exit softkey: exits the menu (at the top level).
End Call key: exits to standby state (from any level)
Lock keys
Locks/unlocks the keypad. When enabled, the Keypad Lock option will lock the keypad immediately. If the keypad is locked, it may be unlocked by the end user pressing the Unlk softkey and then the # key.
Ring options
Telephone ring
Ring cadence
Ring tone
Ring volume
(NetLink i640 Wireless Telephone only)
Vibrate cadence
Allows the user to set the ring for three separate functions. Telephone Ring is used for usual telephony functions. The Auxiliary Rings may be used to set ringing patterns for OAI applications.
Allows the user to set a distinctive ring style, volume and sequence. Select from an audible ring or a
The cadence is the rhythm of the ring. It may be set to a pre- programmed ring cadence or it may be set to obtain its cadence from the PBX. The PBX option is designed to utilize any distinctive rings sent by the PBX while allowing the user to set unique rings for auxiliary applications.
Off: silent
PBX: PBX determines ring cadence (e.g. the PBX may send rings that differentiate between internal and external calls.)
Continuous: rings continually until answered
Short Pulse: rings in short bursts
Long Pulse: rings in long bursts
The Play softkey allows the user to preview the tone before selecting. If Ring Cadence is turned off, the Ring Tone option will not appear on the menu. Select from five available tones (scroll to Tone 5 option).
The graduated volume bar indicates the levels. This setting may be overridden by adjusting volume while the handset is ringing. Select a volume level by pressing the Up and Down side buttons and then pressing the OK softkey. If Ring Cadence is turned off, the Ring Volume option will not display.
The Vibrate cadence options are the same as for Ring Cadence.
Part Number: | Page 14 |