Polycom s640, BPX100, GCN100, DCX200, DCX100, BPN100, s340, 72-1004-01, GCX100, DCN200 manual Battery Packs

Page 27

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Battery Packs

Overview The handset will need to have its Battery Pack recharged periodically. The Nickel Metal Hydride (NiMH) rechargeable handset Battery Pack gives you four hours of talk time or 80 hours of stand-by time (unless PTT is enabled in the NetLink i640 Wireless Telephone only). Stand-by time is when the handset is turned on, but not in an active call.

Indications of low battery The handset will notify you when the charge on the Battery Pack is low by displaying the battery icon. If you are in a call you will hear a soft beep through the earpiece every thirty seconds. User has 15–30 minutes of battery life left. The alerts will increase to every six seconds when there is about one minute of battery life left.

Not in call: The message Low Battery and a loud beep indicate a critically low Battery Pack charge. These occur when the user is not in a call. The handset will not work until the Battery Pack is charged.

Caution: Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage.

NetLink e340, h340 Battery To remove, press down on the latch on the Battery Pack on the Pack removal and replacement back of the handset. The Battery Pack releases outward.

To replace, slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it against the handset.

NetLink i640 To remove, hold the handset in one hand with the keypad facing Battery Pack removal and up. Press both Battery Pack release buttons (on the left and right

replacement sides of the handset) at the same time. The Battery Pack will release downward. You may catch it with the palm of your other hand. If the Battery Pack does not release, gently shake the handset while pressing both release buttons. Do not pry.

To replace, slide the Battery Pack straight into the cavity until it snaps into place. You should not have to force it against the handset.

Changing the Battery Pack while If you are using the NetLink Telephony Gateway, the Battery Pack in a call may be changed while the call is still in progress. Do not press End

Call on the handset. Quickly remove the discharged Battery Pack and replace with a charged Battery Pack, then press Power On to turn the handset back on. Press Start Call to resume the call in progress.

Battery Pack note Battery Packs are not interchangeable. The NetLink i640 Wireless Telephone uses the distinctive square model BPX100 Battery Pack. The Battery Packs for the NetLink e340 and h340 Wireless Telephones are the same rounded shape but different colors. The NetLink e340 model BPE100 Battery Pack is black; the NetLink h340 model BPN100 Battery Pack is steel blue.

Part Number: 72-1004-01-J.doc

Page 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents NetLink e340/h340/i640 Wireless Telephone and Accessories Trademark Information Table of Contents NetLink e340 Wireless Telephone NetLink h340 Wireless Telephone NetLink i640 Wireless Telephone Operating Instructions Status IndicatorsModes of Operation Seconds if another key is not pressed within that period Basic OperationWireless Telephone Headset System Feature Activation Using the Softkeys Standby menu item Nd Level Rd Level Th Level Setting User PreferencesNavigation Lock keysRing options System info Phone optionsExtension Push-to-talk PTTPush-to-talk operation SpectraLink Corporation SpectraLink Corporation NetLink Docking Station NetLink e340/h340/i640 Wireless Telephone AccessoriesOverview Installation System Feature Activation Line/Feature keys Push-to-talk PTT NetLink s640 Docking Station only SpectraLink Corporation Docking Station Charging Unit Battery Packs SpectraLink Corporation NetLink Desktop Chargers NetLink Dual Chargers SpectraLink Corporation NetLink Quad Charger Model GCN100 Model GCX100 NetLink Quad Chargers220 VAC, 50/60 Hz Important Notes about Chargers and Battery Packs General Care of the Handsets and Chargers Please Note Tips for UseOverview Appendix a Cisco Sccp ProtocolFeature Access Call Status Icon Call State Description Appendix B ITU H.323 Protocol Feature activation Appendix C Mitel Networks SpectraLink Corporation See FCN Display above for explanation of OAI position Appendix D SIP Session Initiation Protocol Mute the handset SpectraLink Corporation Operational Warnings Safety and Regulatory InformationElectro Magnetic INTERFERENCE/COMPATIBILITY Specific Absorption Rate SAR Information
Top Page Image Contents