Polycom DCN200, BPX100, GCN100, DCX200, DCX100, BPN100, s640, s340, 72-1004-01 Appendix C Mitel Networks

SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Appendix C: Mitel Networks

		Softkey A		Softkey B			Softkey C
						Fcn3
	Fcn6		Fcn1		Fcn4
Softkey D			Fcn2
14							13
	12							11
			Programmable
	10		Line or Feature					9
					keys
	8							7
	6							5
4							3
2							Line1

Overview

The NetLink Wireless Telephone emulates the Mitel Networks 5220 IP Phone, shown above, including: superkey, local muting, timed reminder, ringer adjust (via superkey), forwarding (via superkey), hot desk, auto answer (via superkey), and resiliency. Some or all of these features may be implemented locally.

All telephone functions and messaging features are supported if possible. Speakerphone functions are not supported.

Certain features and handset operations vary from the SRP protocol.

These variations are explained in this appendix.

In its standby state, the handset displays the extension assigned to this handset. The active state is initiated by pressing either the Start Call key or the MENU key. When the active state is initiated, the handset contacts the PBX and displays the data provided – the time, date, default line icon, any voicemail icon, and softkey and feature key labels.

If the Start Call key has been pressed, the handset is off-hook and there is a dial tone.

If the MENU key is pressed, there is no dial tone; pressing MENU again will bring up the Menu display.

While in the active state, you may switch to any display – Line, Feature, or Menu – by pressing its corresponding key. Pressing a softkey will activate the feature displayed.

Part Number: 72-1004-01-J.doc Page 42