TP-Link TL-PA6010 manual Physical Interface, Power Plug Pair Button Ethernet Port, Indication

			TL-PA6010	AV600 Gigabit Powerline Adapter
	Item	Status		Indication
		On	The adapter is on.
	Power LED	Blinking	The adapter is in power-saving mode or in pairing
			procedure.
		Off	The adapter is off.
		On	The adapter is connected to a powerline network.
	Powerline LED	Blinking	The adapter is transferring data.
		Off	The adapter isn’t connected to any powerline network or
			is in power-saving mode.
		On	The Ethernet port is connected, but there is no data
			being transferred.
	Ethernet LED	Blinking	The Ethernet port is transferring data.
		Off	The Ethernet port isn’t connected.
) Note:

5 minutes after the device connected to the adapter is turned off, the adapter will automatically switch to the power-saving Mode.

1.4 Physical Interface

There are four physical interfaces on this Powerline Adapter.

Power Plug

		Pair Button
		Ethernet Port
Interface	Description
Ethernet Port	A 10/100/1000 Mbps Ethernet port for connecting the adapter to the
	PC or the broadband device with a network cable.
Power Plug*	A Power Plug for connecting the adapter to an AC power socket
	(100–240V~, 50/60Hz).

4