TL-PA6010 AV600 Gigabit Powerline Adapter
Pair Button
Pair buttons are used to secure a powerline network. To secure your network, please follow the steps below. Firstly, plug in a new adapter, and press its pair button for one second; then plug in another adapter and press its pair button for one second as well. The two buttons should be pressed within 2 minutes of each other. After that, wait about 60 seconds so that the two adapters can finish connecting.
*The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example.
)Note:
1.If the pair button is pressed till all the LEDs turn off (about 10 seconds), the powerline adapter will leave the network which it has joined and its new network name assumes a random value. The Power LED turns off when it disconnects from the powerline network.
2.For detailed information about the pair button, please refer to Chapter 5 Advanced Feature: How to Use the Pair Button.
5