TP-Link Manual for MC100CM – Essential Setup and Troubleshooting Guide

Name		Status		Indication
	PWR	On		Power on
Off		Power off
	LFP	On		The Link Fault Pass Through function enable.
Off			The Link Fault Pass Through function disable.
		On	There’s a valid link.
FX	Link/Act	Flashing		The converter is receiving or transmitting
				data from the fiber optic connector.
		Off	There’s no valid link.
		On		The TP port is connected to 100Base-Tx
	SPD
		Off		The TP port is connected to 10Base-Tx
				device or no connection.
		On		The TP port is operating in Full-Duplex
	FDX/Col	Flashing	There’s a collision.
TP
		Off		The TP port is operating in Half-Duplex mode.
		On	There’s a valid link.
	Link/Act	Flashing		The converter is receiving or transmitting
				data from the TP port.
		Off	There’s no connection on the TP port.
			5