TP-Link MC112CS, MC110CS, MC100CM, MC111CS manual Switch

1.5.2Switch

¾TP_AUTO: The TP port operates in Auto-Negotiation mode;

¾TP_DIS: The TP port operates in FORCE mode;

¾TP_100M: The TP port operates in 100Base-Tx;

¾TP_10M: The TP port operates in 10Base-T mode;

¾TP_FDX: The TP port operates in Full-Duplex mode;

¾TP_HDX: The TP port operates in Half-Duplex mode;

¾LFP_OFF: The Link Fault Pass Through function disable;

¾LFP_ON: The Link Fault Pass Through function enable.

Connect different devices, we suggest leaving the switches like these as shown below, otherwise the Media Converter may not work normally.

6