TP-Link MC100CM, MC112CS, MC110CS, MC111CS manual Installation Procedure

3.1 Installation Procedure

Use a fiber cable to connect two converters, or connect a converter with a 100Base-FX Device.

1.Connection of a Converter and a 10/100Base-TX Device (HUB or Switch).

•Make sure that the length of the Cat.5 twisted pair cable between the 10/100Base-TX device and the converter is less than 100 meters.

•Connect one end of the Cat.5 twisted pair cable to the RJ45 jack on the converter and the other end of the cable to the RJ45 jack on the 10/100Base-TX device.

2.Connection of two Converters or a Converter and a 100Base-FX Device.

•Use a SC fiber cable to connect the two Converters’ SC connector or the SC connecter of a Converter and a 100Base-FX Device.

3.Turn on the power.

12