TP-Link TL-PA4030 manual Hardware Connection Internet

Page 13

TL-PA4030AV500 3-port Mini Powerline Adapter

2.6 Hardware Connection – Internet

This section describes how to connect the Powerline Adapter into your existing ADSL broadband connection via ADSL Ethernet port. Follow the procedures described below to connect the Powerline Adapter to your ADSL broadband connection:

1Connect one end of the provided Ethernet (RJ45) cable to an Ethernet port of the Powerline Adapter.

2Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your ADSL broadband Router.

3Plug the Powerline Adapter into a wall socket next to the computer.

4Turn on your computer.

5Check and confirm that the Power LED , Ethernet LED , and Powerline LED on the Powerline Adapter are ON.

The hardware connection mechanism is shown below:

7

Image 13
Contents REV1.0.0 1910010881 TL-PA4030 AV500 3-port Mini Powerline AdapterCopyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Product Description AV500 3-port Mini Powerline AdapterContents Package Contents Introduction Important Safety InstructionsConventions System RequirementTL-PA4030AV500 3-port Mini Powerline Adapter LED Indicator Connecting MechanismIntroduction Status IndicationInterface Description Physical InterfaceHardware Connection Computer Connection InstructionHardware Connection Internet TL-PA4030AV500 3-port Mini Powerline Adapter Installing Management Utility TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter Status Using the Management UtilitySet Local Device’s Network Name Network Add Device Rename the Remote Device/Enter PasswordAdvanced System Upgrade Firmware Reset Device To upgrade the devices firmware, follow these instructionsSet All Devices’ Network Name Set Up a Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonCreate a Powerline network using the Pair button: Pair Secure with 128 bits-AESLeave an existing Powerline AV Network Join an existing Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up